Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Signal Processing Systems : Decoders & Encoders : Blonder Tongue Laboratories, Inc. - HDE-8C-QAM w/Opt 2
Request Quote
All Products
MPEG-2 HD Encoder with Option 2
Model: HDE-8C-QAM w/Opt 2
- Accepts up to 8 programs from any of the following inputs: 8xComponent and 8xComposite
- Supports additional 1 spare input to replace a failed input
- Digitizes, MPEG-2 encodes, and multiplexes up to 8 inputs into 4 QAM output channels (2 programs per QAM channel)
- Provides any 1 of the 4 QAM output streams in ASI format
- Configurable to ITU-T J.83 Annex A and B digital QAM formats
Compare
Project List
Product Info
Tech Specs
Documents
HDE-8C-QAM w/Opt 2 (MPEG-2 HD Encoder: 8xComponent/Composite to 4xQAM) accepts up to eight analog programs from any of the following inputs: 8xComponent and 8xComposite. The encoder is equipped with a spare input (9th input) to replace any one of the primary eight inputs in the event of a failure. The encoder digitizes, MPEG-2 encodes each input into a high-definition stream, multiplexes the resulting eight streams, and then modulates them onto four adjacent watermarked QAM channels in the 54-1002 MHz range (CATV 2-158). Any one of the four QAM outputs is also available in ASI format. The encoder supports Dolby® Digital audio encoding, and Closed Captioning (EIA-608) for each of the eight encoded programs. It is also equipped with an Emergency Alert System (EAS) interface consisting of a composite video and L/R audio program input. EAS triggering is via a 5-12 VDC input or dry contact closure available from most EAS receivers. A front-panel RF test point allows for monitoring/testing of the QAM output without service interruption. Comprehensive remote monitoring and control is accomplished using any standard Web browser via a rear-panel 10/100Base-T Ethernet connection. The encoder accepts eight analog programs from DIRECTV Network’s H25-100 satellite receivers. In the event of a failure on any one of the primary eight receivers, the HDE-8C-QAM w/Opt 2 will automatically switch over to the spare receiver to maintain the program stream. Remote monitoring and control of up to nine DIRECTV Network’s H25-100 satellite receivers is provided through UPnP protocol using a standard Web browser via a rear-panel 10/100Base-T Ethernet connection.
- Accepts up to 8 programs from any of the following inputs: 8xComponent and 8xComposite
- Supports additional 1 spare input to replace a failed input
- Digitizes, MPEG-2 encodes, and multiplexes up to 8 inputs into 4 QAM output channels (2 programs per QAM channel)
- Provides any 1 of the 4 QAM output streams in ASI format
- Configurable to ITU-T J.83 Annex A and B digital QAM formats
- Provides comprehensive GUI-based monitoring and control via standard Web browsers
- Provides a front-panel RF test point (at 20 dB below primary QAM output)
- Equipped with EAS interface (Analog Video + L/R Audio) and triggering compatible with all EAS receivers
- Supports Real-time Dolby® Digital audio encoding
- Supports Closed Captioning EIA-608 for each of the 8 encoded programs
- Supports user-defined PSIP configuration
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Input Signal Types: MPEG-2 HD
- AC Voltage (Maximum): 230 Volts
- AC Voltage (Minimum): 110 Volts
- Depth: 19.50 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 15 lbs
Encoder
1052 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Blonder Tongue Laboratories, Inc.
Model: HDE-8C-QAM w/Opt 2
Request more information from a dealer near you
close
Request more information from a dealer near you