Digital Lighting Gateway, DIN Rail Mount
Model: DIN-GWDL
Part #: 6512086
- Designed exclusively for Crestron Homeâ„¢ OS
- Supports up to 64 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures
- Support expanded up to 85 Crestron light fixtures and Crestron compatible third-party light fixtures with the use of a DIN-GWDL-SPLTR (sold separately)
- RJ-45 adapters included for quick wiring using standard CAT5 cable
- Ability to turn all lights on and off without a control system via local control
The DIN-GWDL is a gateway for Crestron light fixtures and Crestron compatible third-party light fixtures. It provides full control of all connected lighting loads. The DIN-GWDL is configured using the Crestron Home Setup application and controlled using a Crestron Home system.
Crestron Home Color UI
Use the Crestron Home Color UI to easily control the tunable white and full color lighting loads. Adjust hue, saturation, intensity and color temperature. Create scenes to set the mood for entertaining or ensure the optimal setting for a professional conference call. Set lighting schedules or implement Circadian lighting rhythms.
Circadian Rhythm Lighting Control
Sunlight has a predictable rhythm of color temperature and intensity. Connected light fixtures can be synchronized with this natural rhythm.
SolarSync
Match outside light using an outdoor SolarSync photosensor (GLS-LCCT, sold separately). SolarSync communicates the outside color temperature to Crestron Home in real-time and tunes your indoor lighting accordingly.
DMX-C
Built on the DMX512 standard, DMX-C offers the speed and reliability of a traditional DMX system with the seamless and consistent user experience of the Crestron Home OS. When connected to a DIN-GWDL, DMX-C lighting fixtures are auto-discovered, auto-addressed, and treated as native Crestron devices with a consistent and intuitive interface.
Supports up to 85 Crestron Light Fixtures and Crestron compatible third-party light fixtures with DIN-GWDL-SPLTR (sold separately)
The DIN-GWDL has two DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures, for a total of 64 directly connected fixtures. Each added DIN-GWDL-SPLTR adds four additional DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures. The DIN-GWDL with a DIN-GWDL-SPLTR can support a total of 85 Crestron light fixtures and Crestron compatible third-party light fixtures.
Fast Commissioning
Connect Crestron light fixtures and Crestron compatible third-party light fixtures quickly with the RJ-45 adapters. Verify the system immediately by testing lighting loads with local controls. Once connected to a Crestron Home processor, DMX-C allows for lighting loads to be automatically addressed and discovered using the fixture identify tool.
Local Control
Adjust intensity or turn all connected fixtures on and off through local control on the DIN-GWDL.
- Designed exclusively for Crestron Homeâ„¢ OS
- Supports up to 64 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures
- Support expanded up to 85 Crestron light fixtures and Crestron compatible third-party light fixtures with the use of a DIN-GWDL-SPLTR (sold separately)
- RJ-45 adapters included for quick wiring using standard CAT5 cable
- Ability to turn all lights on and off without a control system via local control
- Auto-addressing and quick commissioning through the Crestron Home Setup Application
- Compatible with Crestron SolarSyncâ„¢ sensors
- 6U 35 mm DIN rail mountable
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): 32 F
- Certifications: FCC, IC, CE, and UL
- Active Power: 5 Watt
- DC Voltage: 48 Volts
- Depth: 1.73 in
- Height: 4.96 in
- Width: 4.23 in
- Product Weight: 0.44 lbs
- Sustainability Rating: IP40
- Supported Fixtures: Crestron light fixtures, Crestron compatible third-party light fixtures
- Data Storage: Removable MicroSD Card (supplied)
- COMMUNICATIONS:
•DMX-C: Supports discovery, auto-addressing and fixture data; DMX-C communications with Crestron light fixtures and Crestron compatible third-party light fixtures
•Ethernet: 100BASE-TX Ethernet; Static IP or DHCP - Connections:
•LAN PoE Class 2: (1) 8-pin RJ-45 connector, female; 100BASE-TX Ethernet port; PoE (Power over Ethernet) PD (Powered Device)
•9-48VDC: (1) 3-pin 5.18 mm terminal block; 9 - 48VDC, 5W max; Use only when not powering the device using PoE
•DMX 1-2: (2) 3-pin 5.18 mm terminal blocks; Isolated DMX-C outputs; One universe split between two ports; Each output supports up to 32 directly connected devices
•Wiring: Use shielded CAT5 wire or better with a shielded connector, do not connect drain to ground; 24 AWG minimum; RJ-45 to 3-pin adapters included to make CAT5 STP connections; Daisy chain all fixtures, do not create loops; 1,000 ft (305 m) maximum per output
•Termination: Terminate all daisy chain runs with the termination resistor included with the fixtures; Terminate the connection to a DIN-GWDL-SPLTR with the 120ohms termination resistor included with the DIN-GWDL-SPLTR between the + and - pins on the terminal block that connects to DMX IN
•INPUTS and OUTPUTS: (1) 8-pin 5.18 mm terminal block, shared between INPUTS and OUTPUTS
•INPUTS 1-2: (2) inputs for contact closure, INPUT 1 contact controls Override mode and INPUT 2 contact controls the lights when Override mode is on; INPUT 1: When the contact is closed, Override mode is turned on. When the contact is open, Override mode is turned off and the lights operates normally; INPUT 2: When the contact is closed, the lights turn off. When the contact is open, the lights turn on
•OUTPUTS 1-2: (2) individually isolated (1KV) relay outputs (48V 250mA); Repeats signal from corresponding INPUT 1 or 2; Connect to additional DIN-GWDL INPUTS or other device override inputs - Controls and Indicators:
•MODE Rotary Dial: (1) Dial for selecting different test modes for DMX outputs
•SELECT Button: (1) Push button function varies based on test mode selected
•RESET Button: (1) Recessed push button for software reset
•PWR LED: (1) Red LED indicates operating power is supplied
•ACTIVE LED: (1) Red LED indicates device is active
•ETHERNET LED: (1) Red LED indicates ethernet activity
•I/O LED: (1) Red LED flashes when a change occurs on the INPUT or OUTPUT terminals
•DMX LED: (1) Red LED indicates DMX activity
•OUTPUT LED: (1) Red LED indicates that the device is actively controlling the lights - Humidity: 10% to 90% RH (noncondensing)
- Construction: Mounting: 6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail))
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com