Power amplifier 120W, 1 channel
Model: U120:1
- Full power output supporting 4, 8ohms, 70 V and 100 V
- EMG override input, ensuring critical messages are heard clearly
- Contact override with 2-tone chime for attention-grabbing alerts
- 120 Hz high-pass filters to customize audio output and eliminate unwanted low-frequency noise
- Space-saving compact ½ rack design, providing versatility without compromising performance
Introducing the U120:1, a 120 W power amplifier designed to cater to the demands of small to mediumsized installations, where paramount considerations include quality, performance, and unwavering reliability. This amplifier is ideal for background music and crystal-clear voice announcement applications, making it a perfect fit for diverse environments such as bars, restaurants, retail outlets, educational institutions, houses of worship, museums, galleries, transport hubs, and conference centers. Thanks to its compact size, standing just one rack unit high and half rack wide, the U120:1 presents numerous installation possibilities, even in spaceconstrained settings. Included brackets facilitate both single and dual rack-mount configurations, while desktop and under-counter installations are equally viable. When rack-mounted side by side, two amplifiers can seamlessly inhabit a single rack unit, optimizing space utilization and effectively doubling both channel count and output power.
- Full power output supporting 4, 8ohms, 70 V and 100 V
- EMG override input, ensuring critical messages are heard clearly
- Contact override with 2-tone chime for attention-grabbing alerts
- 120 Hz high-pass filters to customize audio output and eliminate unwanted low-frequency noise
- Space-saving compact ½ rack design, providing versatility without compromising performance
- Remote activation of standby mode with Remote OFF (Stand by), enhancing energy efficiency
- Amplifier Type - Mixer Amplifier
- Rackmountable - Yes
- Warranty - Yes
- Spec Sheet available - Yes
- Color: Black
- Warranty (Length/Type): 1 Year
- Minimum Frequency Response (Bandwidth): 10 Hz
- Minimum Frequency Response (Bandwidth): 0.01 kHz
- Maximum Frequency Response (Bandwidth): 22000 Hz
- Maximum Frequency Response (Bandwidth): 22 kHz
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 23 F
- AC Voltage (Minimum): 100 Volts
- AC Voltage (Maximum): 240 Volts
- Number of Channels: 1
- Number of Watts Per Channel: 120 Watt
- Total Harmonic Distortion + Noise (THD+N): 1 %
- Active Power: 9 Watt
- Peak Power: 11 Watt
- Standby Power: 1.25 Watt
- Depth: 8.57 in
- Height: 1.74 in
- Width: 8.60 in
- Product Weight: 5.11 lbs
- Shipping Weight: 5.90 lbs
- Power: 400 VA
- Remote power (ON/OFF Stand by): 2-pin, Eurostyle, contact closure
- Output Stage Topology: Class D
- Bass shelving: ±12 dB / 150 Hz - 3 dB (100 Hz)
- Treble shelving: ±12 dB / 5 kHz - 3 dB (10 kHz)
- Protect (Red): Protection, short circuit
- Peak (Red): 1 dB before clip (input and output)
- Signal (Green): Input and output signal
- Call (Green): EMG
- Power (Green): Power on condition
- DIP Switches: EMG (HiZ/Line level), HPF (120 Hz), Output (HiZ/LowZ), Amp mode (70 V/100 V; 4/8ohms)
- Amplifier: Audio limiters, high temperature, DC, HF, short circuit, over current protection
- Switching mode power supply (µPC controlled): Mains over/under voltage protection, inrush current limiter, mains over current, high temperature
- Remote power OFF: Contact closure
- Type: Line
- Connector: RCA (chinch), stereo converted to mono, unbalanced; 3-pin Eurostyle, balanced
- Sensitivity: 100 mV
- Impedance: 4.6 kohms
- Headroom: 19 dB
- Rated Output Power: 120 W
- Max output voltage, 1 kHz, THD=0.5%, no load: 4/8 ohms 70 V 100 V 22 VRMS 32 VRMS
- Cooling concept: Four-stage-fans (Off / Slow / Medium / Fast)
- Storage Temperature: -40°C - 70°C (-40°F -158°F)
- Mounting: Stand-alone; 19" rack; rack side-byside; half 19" rack; table-top; undertable
- Impedance: 8 ohm
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com