Wired Stereo Microphone with 100 Ohms Nominal Impedance
Model: MKH 800 TWIN
Part #: 502083
- Remote adjustability
- Stable pickup patterns can be set and optimized under monitoring conditions
- Wide range of mixes for stereo and surround are possible (including in parallel)
- High sensitivity
- Very low inherent noise
Universal studio condenser wired stereo microphone includes dual capsule consisting of two symmetrical push-pull transducers with high linearity. Side fire microphone with the two cardioid pickup patterns of the transducer aligned back-to-back across the axis of the microphone. Signals of both transducers are not combined in the microphone in order to generate differing pickup patterns but are available separately as two channels at the microphone output. Allows the pickup patterns of the MKH 800 TWIN to be remotely adjusted. Signals can be combined in any desired way in the mixing console in order to create all pickup patterns from omnidirectional to figure-8 with an infinite number of intermediate stages. Based on the legendary MKH 800, this microphone opens up to a new dimension of studio recordings.
- Remote adjustability
- Stable pickup patterns can be set and optimized under monitoring conditions
- Wide range of mixes for stereo and surround are possible (including in parallel)
- High sensitivity
- Very low inherent noise
- High linearity transducers
- Extended frequency response
- Small and slim design
- Optionally dark housing design (Nextel)
- Polar/Pickup Pattern - Cardiod
- Microphone Type - Condenser
- Microphone Type - Stereo
- Microphone Connectivity - Wired
- Maximum Frequency Response (Bandwidth): 50000 Hz
- Maximum Frequency Response (Bandwidth): 50 kHz
- Minimum Frequency Response (Bandwidth): 30 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Impedance: 100 ohm
- Maximum SPL (Sound Pressure Level): 134 dB
- Sensitivity: -28 dBV
- Wireless: No
- Product Weight: 0.38 lbs
- Current Consumption: 2 x 3.1 mA
- Equivalent Noise Level: 12 and 20 dB
- Minimum Terminating Impedance: 2 Kilo Ohms
- Phantom Voltage: 48 +/-4 V
- Maximum Output Voltage: 4 V
- Minimum Load Impedance: 2 Kilo Ohms
- Noise Voltage: 3microAmps (A-weighted) and 8microAmps (CCIR-weighted)
- Dynamic Range: 122dB (A-weighted) and 114dB (CCIR-weighted)
- Connector: XLR-5M
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com