Horizontal 19" IT Rackmount Cable Manager 2U Double-Sided Black

Model: ECMH2UD

Easy to put together and run cables through.
Use to manage and route cables efficiently in EIA standard 19" racks.
Horizontal and vertical units can be used alone or together in a 2 or 4 open post frame rack

Compare

Project List

Product Info

Tech Specs

Double-hinged removable covers provide easier access during installation.
No obstructions. An entire unit can be used for cables routing.
Available in 1U single-sided and 2U single- and double-sided versions.
Arrowhead-shaped fingers funnel cables into the base and hold them securely.
Enable easy cable routing. Insert and remove cables while maintaining retention.
Rounded end posts maintain proper bend radius and protect cabling as it enters and exits the manager - no tearing and gouging of jackets when quickly routing cable.
High capacity and extra depth for maximum CAT5e, CAT6, and CAT6a cabling density.
Cover hinges on the top or bottom and snaps close to protect cabling, or it can be removed.
Has large passthrough holes for running cable from side to side.
"Tool-less" snap-in design holds manager in place during installation.
Includes 10-32 and 12-24 screws for mounting.
Add the steel Horizontal Tie-Down Bar to support and maintain a bend radius for cables on the backside of a rack, behind a patch panel, for example. It can also be used to support runs between the horizontal and vertical managers, or above a patch panel to separate and control patch cables.

Easy to put together and run cables through.
Use to manage and route cables efficiently in EIA standard 19" racks.
Horizontal and vertical units can be used alone or together in a 2 or 4 open post frame rack