Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
6" 600W Ribbon Line Array Surround Speaker
Model: LA4S
Part #: 145-142108-01
- Exclusive single enclosure, parabolic line array design
- 4 x 6" ribbon drivers, plus 4 x 6.5" paper/Kevlar composite cone drivers
- Dramatically higher RMS to peak max SPL ratio than compression driver systems
- Approximately four times the optimal listening area than point source systems
- Extremely even coverage, typically varying by less than 6dB throughout entire audience area
Product Info
Tech Specs
Related Products
Documents
The Christie® LA4S line array surround speaker combines advanced ribbon driver technology with a unique coaxial articulated line array design to provide greatly enhanced clarity, dramatically reduced distortion and ultra-fast transient response. The extremely low mass of the ribbon driver diaphragm allows Christie LA4S to respond very quickly to signals. This eliminates the effects of high frequency breakup and power compression, while enabling extended high frequency response and the accurate reproduction of the original source material. Providing perfect timbre-matching with our Christie LA4 and LA5 Series speakers, the Christie LA4S is the premium solution for leading immersive audio applications in 400± seat auditoriums.
- Exclusive single enclosure, parabolic line array design
- 4 x 6" ribbon drivers, plus 4 x 6.5" paper/Kevlar composite cone drivers
- Dramatically higher RMS to peak max SPL ratio than compression driver systems
- Approximately four times the optimal listening area than point source systems
- Extremely even coverage, typically varying by less than 6dB throughout entire audience area
- Enhanced voice intelligibility, low distortion and highly controlled dispersion
- Limited five year warranty
- Horizontal Symmetry - Yes
- ISO 14001 Certification - Yes
- Vertical Symmetry - Yes
- Warranty - Yes
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Speaker Diameter (Driver): 6 in
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 60 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Construction: 18mm marine plywood
- Coverage Horizontal: 120 degrees
- Coverage Vertical: 60 degrees
- Impedance: 3 ohm
- Maximum SPL (Sound Pressure Level): 139 dB
- Power Handling: 600 Watt
- Sensitivity: 104 dB
- Depth: 16.23 in
- Height: 23.40 in
- Width: 10.60 in
- Net Weight: 54 lbs
- Warranty (Length/Type): 5 Years Limited
- System Type: Coaxial articulated, ribbon driver line array, 2-way passive, in a single ported enclosure
- Driver Components:
-
4 x 6" ribbon drivers
4 x 6.5" paper/Kevlar composite mid-bass drivers - Crossover: Linear phase, passive, symmetric crossover @ 1.5kHz, 12dB/octave
- Maximum SPL: 128dB (AES), 130dB (IEC) long term, 131dB (IEC) short term
- Power Handling: 1000W (IEC) long term, 1200W (IEC) short term
- Recommended Amplifier Power: 450-1000W (FTC) @ 8 ohms
- Input Connectors: Screw terminal barrier strip
- Enclosure:
-
Vented box alignment
Heavily damped and braced - Mounting Options:
- Wall or ceiling mounted using 4 x M8 points
Flown using 2 x M10 on top and 1 x M8 on rear - Accessories (optional): Allen Products MM-024 or MM-060 (for wall mounting) MM-3RDX-18 (for ceiling mounting)
Line Array Speaker
46 kb
- Instructions
Line Array Speaker
2065 kb
- Brochure
Speaker
479 kb
- Data Sheet
Request Quote
Suggested Products
by
Electro-Voice
by
Electro-Voice
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Christie
Model: LA4S
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you