Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4K-HDR over HDBaseT Extension System
Model: HTE-T III TX/RX
- HDMI 2.0a compliant
- 4K2K at 60 4:4:4 8bits
- HDR 4K2K at 60 4:2:0 10bits
- Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 36-bit, 70m (230ft) at 4K2K at 60 444 (4K-HDR Technology)
- PoC (Power over Cable) which can power both units from TX or RX side with power supply
Compare
Project List
Product Info
Tech Specs
Documents
The HTE-T III 4K-HDR HDMI Extender over Single Cat.X with HDBaseT, RS-232, Bi-directional IR, Ethernet, PoC and ARC boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. With the advanced design for the latest HDMI 2.0a technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 2.2 supports and compatibility are all further insured.
- HDMI 2.0a compliant
- 4K2K at 60 4:4:4 8bits
- HDR 4K2K at 60 4:2:0 10bits
- Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 36-bit, 70m (230ft) at 4K2K at 60 444 (4K-HDR Technology)
- PoC (Power over Cable) which can power both units from TX or RX side with power supply
- ARC on transmitter & receiver unit
- HDCP & EDID Bypass
- CEC support
- Auto equalization
- Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
- DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
- Full frequency IR signal from 20KHz to 60KHz
- Bi-directional IR path-through
- Integrated port for LAN/network device
- Full Duplex RS-232 control up to 115,200 bps through connector
- Wall mounting housing design for easy and robust installation
- Video latency less than 20 ms.
- Spec Sheet available - Yes
- Compliance: HDMI 2.0a
- Video Support: HDR 4K2K at 60 (4:2:0 10bits) / 4K2K at 60 (4:4:4 8bits)
- Input TMDS signal: 1.2 Volts [peak-to-peak]
- Equalization: Auto
- Input DDC Signal: 5 Volts [peak-to-peak, TTL]
- ESD Protection: Human body metal - + 15kV [air-gap discharge] & +8kV [contact discharge]
- IR Pass-Thru: Bi-directional
- PCB stack-up: 6-layer board [impedance control – differential 100ohm; single 50ohm)
- PoC SUPPORT: Yes
- RS-232 Support: Yes
- HDMI Connector: Type A [19-pin female]
- HDMI Source Control: Controllable via IR pass-through from RX to TX with IR extenders
- RJ-45 connector: WE/SS 8P8C (Reverse Mode)
- MIN DIN CONNECTOR: DIN-9
- 3.5mm Connector: TX: IR receiver / IR blaster, RX: IR receiver / IR blaster
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Current Draw: 1 Amps
- DC Voltage: 24 Volts
- Depth: 2.87 in
- Height: 0.83 in
- Width: 6.02 in
HDBaseT Extension System
2992441 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
PureLink
Model: HTE-T III TX/RX
Request more information from a dealer near you
close
Request more information from a dealer near you