Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2-Channel Balance Line Input to Dante Interface
Model: TSD-DAC2I
- Dante digital audio platform
- 2 CH balanced analog line input
- Wide range gain adjust -20dB to +20dB
- AUX, Line and Mic Levels
- Input clip indicator
Product Info
Tech Specs
Related Products
Documents
The AtlasIED TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante digital audio. The TSD-DAC2i can be used for any Analog to Dante digital audio end point but is ideally suited to be used with the AtlasIED WTSD wall mixer series. Once converted into Dante digital audio, the audio can be transmitted over IP networks and routed in the Dante Controller software. The TSD-DAC2i Dante transmitter I/O module features two analog balanced line inputs with a variable gain to operate from line to mic level. An Input Clip indicator illuminates when clipping signals are present. There are indicators for Power and Network connection. The TSD-DAC2i requires no external power supply, it is powered via a network PoE port or a PoE cable power injector.
- Dante digital audio platform
- 2 CH balanced analog line input
- Wide range gain adjust -20dB to +20dB
- AUX, Line and Mic Levels
- Input clip indicator
- PoE powered
- Mounting plate
- Incorporates with WTSD wall mixers
- Applications: Any project requiring a gateway from analog audio to network audio
- Network audio signal end points
- Hotel ballroom analog announcing stations
- School gym / auditorium audio interface
- Analog paging station conversions to dante digital audio
- Transportation station audio interface
- Dante Enabled - Yes
- Spec Sheet available - Yes
- Current Draw: 0.04 Amps
- DC Voltage: 52 Volts
- Peak Power: 1.90 Watt
- Depth: 3.17 in
- Height: 1 in
- Shipping Depth (with packaging): 4.25 in
- Shipping Height (with packaging): 2 in
- Shipping Width (with packaging): 5.50 in
- Width: 3.60 in
- Product Weight: 0.44 lbs
- Shipping Weight: 0.70 lbs
- Color: Black
- System:
•Type 2-CH PoE Dante Transmitter
• Network Connection: Single RJ-45, CAT-5 (or better), PoE Switch or Injector Required - Inputs>/b>:
•Input Connectors: Qty 1
•Type: 5 Position Phoenix Type, 3.5mm Pitch
•Input Gain Selection (See Note 1): 0dBu Output When Reference to 20dBFS Equipment “0” = -10dBu, (230mV AUX Levels) “-20” = +10dBu, (2.5V Line Levels) “+20” = -30dBu (25mV Mic Levels)
•Phantom Power: N/A - Status Indicators:
•Input: N/A
•Output: N/A
•Data: Green, Located on RJ45
•Network Audio: Blue, Qty 1
•Power: Yellow, Located on RJ45
•Input Clip: Red, Qty 1 - Electrical Specifications:
•Analog Input Impedance: 15K?
•Analog Output Impedance: N/A
•Input Clip LED On Threshold: A. “-20” = 23.5 dBu +/-1dBu (11.8V) B. “0” = 9.4dBu +/-1dBu (2.3V) C. “+20” = -10.9dBu +/-1dBu (220mV)
•Maximum Input Level: A. “-20” = 23.5 dBu +/-1dBu (11.8V) B. “0” = 9.4dBu +/-1dBu (2.3V) C. “+20” = -10.9dBu +/-1dBu (220mV)
•Dante Transmission Speed: 100Mbps
• THD 0.06% @ 1KHz
•Signal To Noise: 95dB @ 1kHz (A Weighted)
•Dynamic Range: 100dB (-60dBFS A Weighted) - Mechanical:
•Material: Steel
•Mount: Mounting Plate & M3 x 4MM Screws, Qty 2
WTSD-MIX31K
- Indoor/Outdoor Analog Wall 3X1 Mic/Line/Bt/Aux Mixer W/Optional Dante® Audio Network Interface
WTSD-MIX41K
- Indoor/Outdoor Analog Wall 4X1 Mic/Line Mixer W/Optional Dante® Audio Network Interface
Audio Interface
1194445 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
AtlasIED
Model: TSD-DAC2I
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you