Products
Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
AFI-8 Black Passive Loudspeaker with Mounting Frame
Model: 106-0806
- Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24
Product Info
Tech Specs
Documents
The AFI-8 is a fully arrayable loudspeaker capable of filling large churches, theaters, sports venues, and theme parks with clean, articulate full bandwidth sound. Available with a 60° x 40° or 90° x 40° high-frequency horn pattern insuring that the AFI-8 works flawlessly in any room configuration. A bi-amplified version is also available.
- Driver Complement: Low-Frequency: One Apogee 15 inch (381mm) neodymium magnet cone-type driver is treated with a waterproofing compound, providing resistance to moisture, and enabling long-term stability of cone resonance and cone mass parameters
- Also treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short-term impedance rise
- High-Frequency: One Apogee 3 inch (76mm) voice coil, 2 inch(51mm) exit horn-loaded compression driver treated with Ferrofluid® for greater power handling capability, lower distortion, and control of short term impedance rise
- Input Connectors: Barrier strip, screw type #8
- Compatible Processors: AFI Main Frame Controller Chassis (using either AFI-8/-8B/-8W/- 8WB Modules) or DLC24
- Recommended Crossover (AFI-8B only): Contact Apogee for full technical data on other DSP-based Processors
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts) Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Cabinet Construction: Multi-ply hardwood
- Options/Accessories: AFI Controller Processor or DLC24 Digital Processor; SX weather treatment for use in limited exposure enclosures ; assorted rigging components
- Loudspeaker Setup - Rigged
- Powered (Active) - Yes
- Spec Sheet available - Yes
- Depth: 15.10 in
- Finish: Textured high-strength black or white epoxy paint; other colors optional
- Format: Passive/Two-way
- Height: 30.25 in
- Impedance: 8 ohm
- Input Connectors: Barrier strip, screw type #8
- Sensitivity: 99 dB
- Width: 20.25 in
- Enclosure Type: 30° trapezoidal, optimally-vented bass
- Grille: Highly durable, quality finish on perforated steel (aluminum on SX version)
- Handles: Two handles – one top, one bottom – designed as an integral part of the enclosure (no moving parts)
- Maximum SPL (Sound Pressure Level): 125 dB
- Cabinet Construction: Multi-ply hardwood
- Product Weight: 77 lbs
- Coverage Horizontal: 60 degrees
- Coverage Vertical: 40 degrees
- Color: Black
- Construction: Hardwood
- Minimum Frequency Response (Bandwidth): 46 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Finish: Textured
- Speaker Diameter (Driver): 15 in
- Power Handling (High Frequency): 1600 Watt
- Power Handling (Low Frequency): 400 Watt
- Compatible Processors: AFI Main Frame Controller Chassis (using AFI-4 Module) or DLC24
- Rigging Hardware: Fourteen rigging points, four each on top and bottom, two each on both sides and rear, all backed with 16-gauge steel; points can be type 3/8 inch-16 or M10 thread
- PTML (peak transient mechanical limit): 141 dB
Loudspeaker
433150 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Bogen Communications, Inc.
Model: 106-0806
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you
Request service support
Thank you,
for submitted successfully
Thank you,
for submitted successfully
Get in touch
Thank you,
for submitted successfully