Products
VoIP Ceiling Speaker
Model: NQ-S1810CT-T1
- 10/100 Ethernet connection
- PoE Class-3 – no local power required, IEEE 802.3af compliant
- DHCP deployment for easy installation
- Pre-assembled for easy installation
- 10W integrated amplifier
The Bogen Nyquist NQ-S1810CT-T1 VoIP Ceiling Speaker offers increased flexibility where installers can use the VoIP speaker as a source for up to four (4) secondary passive 25V/70V speakers in a local speaker network, while retaining two-way intercom via the MEMS microphone on the VoIP speaker. The NQ-S1810CT-T1 can also serve as a PoE-based SIP endpoint in 3rd-party systems when operating in Standalone mode.
With the Nyquist NQ-S1810CT-T1 VoIP Ceiling Speaker, there is no need for external amplifiers, traditional intercom wiring, or transformer taps to manually set or adjust. Connect the speaker via Cat5-or-better cabling to a Power-Over-Ethernet (PoE) Switch or PoE Injector, and it is ready to use!
- 10/100 Ethernet connection
- PoE Class-3 – no local power required, IEEE 802.3af compliant
- DHCP deployment for easy installation
- Pre-assembled for easy installation
- 10W integrated amplifier
- Reset button for restoring factory settings
- Form-C SPDT type 2A @ 30V DC dry contact relay output for muting local A/V audio.
- DSP-based noise rejection and voice bandwidth optimization
- MEMS digital microphone for superior talkback audio
- CAN Bus 2.0 Interface connects to Nyquist Digital Call Switches (NQ-E7020-G2)
- Loudspeaker Mount Type - Ceiling
- Spec Sheet available - Yes
- Width: 13 in
- Diameter: 3.25 inch
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Request service support
Thank you,
for submitted successfully
Thank you,
for submitted successfully
Get in touch
Thank you,
for submitted successfully