Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
12x8 Signal Processor with Digital Audio Bus
Model: BLU-100
- 12 Analog Inputs (with 48v Phantom Power per Channel)
- 8 Analog Outputs
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 48 Channel, Low Latency, Fault Tolerant Digital
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The Soundweb London BLU-100 offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing and a high bandwidth, fault tolerant digital audio bus. The BLU-100 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features a low latency, fault tolerant digital audio bus of 48 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km. The BLU-100 is compatible with the entire Soundweb London family and its 48 channel digital audio bus represents channels 1-48 of the larger 256 channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120 and BLU-BOB devices. Analog Inputs provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Phantom Power, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
- 12 Analog Inputs (with 48v Phantom Power per Channel)
- 8 Analog Outputs
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 48 Channel, Low Latency, Fault Tolerant Digital
- Clear Front Panel LED Indication
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO
- Soundweb London Interface Kit for Third Party
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
- Spec Sheet available - Yes
- Front Panel Led Indicators-Per Input: Signal Present, CLIP, 48V (Input only)
- Front Panel Led Indicators-Other: COM, STAT, ERR, PWR
- Maximum Input Level: +20dBu with 0dB input gain,+8dBu with 12dB gain
- CMRR: >75 dB at 1KHz
- Input Noise (E.I.N.): <-128 dBu typical with 150ohm source
- Phantom Power: 48 V nominal, selectable per input
- A/D Latency: 37/Fs [0.77ms@48k]
- Analog Outputs: 8 electronically balanced on Phoenix/Combicon removable screw connectors
- Maximum Output Level: +19 dBu
- Output Impedance: 40 ohm balanced
- Output Impedance: 20 ohm unbalanced
- D/A Latency: 29/Fs [0.60ms@48k]
- Control Ports: 12 inputs and 6 outputs
- Control Input Voltage: 0 to 4.5 V
- Control Input Impedance: 4.7kohm to +5V (2-wire mode), >1Mohm (3-wire mode)
- Logic Output Voltage: 0 or +5 V unloaded
- Logic Output Impedance: 440 ohm
- Logic Output Current: 10mAsource, 60mA sink
- Watchdog Output: Phoenix/Combicon connector for failsafe control
- Opto Output Current: 14 mA maximum
- Withstanding Voltage: 80 V maximum (Off)
- Series Impedance: 220 ohm (isolated)
- Control Network Connectors: RJ45 Ethernet connector
- Control Network Maximum Cable Length: 100m/300ft on Category 5 cable between device and Ethernet switch
- BLU link Connectors: 2 x RJ45 Ethernet connectors
- BLU link Maximum Cable Length: 100m/300ft on Category 5e cable between devices
- Max. Number of Nodes: 60
- Latency: 11/Fs [0.23ms@48k]
- Pass Through Latency: 4/Fs [0.08ms@48k]
- Power Consumption: <55 VA
- BTU Rating: <188 BTU/hr
- Operating Temperature (Maximum): 95 F
- Operating Temperature (Minimum): 41 F
- Input Impedance: 3500 ohm
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
- AC Voltage: 240 Volts
- Depth: 9 in
- Height: 1.75 in
- Width: 19 in
- Product Weight: 6.40 lbs
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Crosstalk: 75 dB
- Dynamic Range: 108 dB
BLU-GPX
- General Purpose I/O Expander
BLU100_DataSheet.pdf
720 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close

McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
BSS Audio, Ltd.
Model: BLU-100
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you