Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Professional Converge USB Digital Audio Expander
Model: CONVERGE Pro 2 USB Expander
Part #: 910-3200-302
- USB Audio
- 2 x 2 channels - Tx X Rx, with left and right channels
- Professional quality digital audio - 48kHz, 24-bit
- USB 3.0 and USB 2.0 ports compatible
- Windows/Mac compatible
Compare
Project List
Product Info
Tech Specs
Documents
The USB Expander expands the USB Audio capability of a CONVERGE Pro 2 mixer by providing an additional USB audio interface with 2x2 channels.
This device enables users in different rooms to run UC applications in laptops for a professional quality audio experience using a simple, flexible USB connection.
The USB expander can be daisy-chained with other P-Link peripheral devices such as the Beamforming Mic Array 2, DIALOG 20 Receiver, and GPIO Expander. It can be used as a P-Link distance extender.
- USB Audio
- 2 x 2 channels - Tx X Rx, with left and right channels
- Professional quality digital audio - 48kHz, 24-bit
- USB 3.0 and USB 2.0 ports compatible
- Windows/Mac compatible
- Daisy-chainable
- Maximum 3 USB expanders per CP2 device
- Daisy-chains and co-exists with other P-Link devices
- Extends distance
- By 200 feet (60 meters) from CP2 device
- By 200 feet (60 meters) for other P-Link devices
- Form factor and mounting
- Compact form factor - 1/3rd RU width, 1U height
- Rack-shelf mount
- Under the table mount
- Wall mount
- Ceiling mount
- Connectivity and power
- Direct connection to CONVERGE Pro 2 (CP2), Beamforming Microphone Array 2, and DIALOG 20 Wireless Receiver
- P-Link for power, audio, control from CP2
- PoE Injector for power
- RS-232 connection for control interface
- USB connection for audio
- Applications:
- Unified communication (UC)
- Video conferencing (VC)
- Audio playback
- Audio recording
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 14 F
- Number of Channels: 2
- Number of Inputs: 2
- Number of Outputs: 2
- Rack Units (Height): 1
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 3 Watt
- Depth: 1.60 in
- Height: 4.10 in
- Width: 5.50 in
- Product Weight: 0.88 lbs
- USB Audio:
•Port Type: USB-B connector
•Audio: Digital audio, 2 x 2 bidirectional channels
•Sample Rate: 48kHz
•Sample Bit Depth: 24Bit
•Compatible: USB 2.0, USB 3.0
•USB Cable Distance: 16 feet (5 meters)
•Compatible: Windows and Mac OS devices - P-Link Peripheral Bus:
•Ports Type: RJ-45 (Cat5e or Cat6)
•P-Link In and Out: proprietary peripheral bus
•PoE In:
•P-Link In Port
•PoE IEEE802.3AF
•Audio:
•Up to 3 USB Expander units + Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units
•Cable: Solid core 24AWG, factory terminated Cat 5e or Cat 6 cable
•Distance: Up to 200 feet (60 meters)
•Daisy-chain:
•Up to 3 USB Expanders with each CONVERGE Pro 2 unit
•Up to 3 Beamforming Microphone Array 2 units and up to 3 DIALOG 20 wireless
•Receiver units along with up to 3 USB expander units with each supported CONVERGE Pro 2 unit in the same chain
•Up to 6 USB Expander units in the same chain with 2 supported CONVERGE Pro 2 units connected through C-Link - RS232:
•Type: 3 Position (Tx, Rx, Gnd) 3.81mm Grey Header, Male, Phoenix type Euro block connectors
•Support: Serial commands
•Connection: Connect with Touch Panel Controller for CP2, third-party control devices - Power Selection Switch:
•Sensor Type: Slide Switch
•Toggle toward P-Link to power device by P-Link
•Toggle toward PoE to power device by PoE Injector - PoE In Port:
•Port Type: RJ-45 port
•PoE: 802.3af or 802.3at PoE/PoE+ injector input - Configuration and Administration Software:
•CONVERGE Pro 2 CONSOLE software - Front Panel LEDs:
•Power LED:
•Off: Not powered
•Solid Blue: Powered ON
•Status LED:
•Off: No P-Link plugged in
•Solid Blue: P-Link plugged in and system working normally
•Flashing Blue: Locate mode initiated from CP2 CONSOLE Software
•Red: Error condition - Mounting:
•Rack-shelf mount
•Underneath table mount
•Wall mount
•Ceiling mount - Power and Thermal:
•Power Type: PoE/PoE+
•Port Type: RJ-45
•Power Source: P-Link or PoE Injector
•PoE In/P-Link In: 802.3af or 802.3at PoE/PoE+
•Power Source Indicator: Set the position of the Power Select switch to indicate the source of the power (P-Link or PoE)
•Typical Thermal: 10.24 BTU/Hr Max - Dimension and Weight:
•With rack-ears Width x Depth x Height: 6.8x1.7x 4.1-inch or 17.2x4.3x10.3cm - Parts Included:
•Rack Mounting Ears: Pre-installed, Qty 2
•Input Connectors:
•3.81mm Terminal Block Connector, 3 Position (Grey), Qty 1
•USB Cable: USB Type A to Type B, 6 Ft (1.8M), Qty 1
USB Expander
766911 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close

McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
ClearOne
Model: CONVERGE Pro 2 USB Expander
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you