Analog input, 4 channel, 300W per output channel, Amplifier
Model: CDi4x300
Part #: NCDI4x300-U-US
- DriveCore Technology - Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design
- DSP - on-board digital signal processor in each amplifier allows for custom configuration
- Input Router
- Input Delay - Up to 1000ms
- Input Parametric EQ - 8 band
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance, rich feature set. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore offers streamlined functionality to work in almost any small/medium installation, cinema, retail store, and more. Designed for ease-of-use in a variety of applications, the CDi DriveCore series is available in 2 or 4-channels and includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. Each variation of channel-count/output-power is also available with BLU link (BL models), adding the ability to send and receive channels over HARMAN's digital audio BUS.
- DriveCore Technology - Crown’s proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design
- DSP - on-board digital signal processor in each amplifier allows for custom configuration
- Input Router
- Input Delay - Up to 1000ms
- Input Parametric EQ - 8 band
- Crossover
- Output Parametric EQ - 8 band
- Output Delay - Up to 100ms
- LevelMAX™ Limiter
- BLU link (BL models only) - Both receive and send channels over HARMAN’s 256 channel, fault-tolerant audio BUS, BLU link
- Direct Drive 70/100Vrms Output - Each output channel is capable of provide either 70V or 100V for high impedance applications
- Front-Panel Interface - Completely configure the amplifier using an intuitive front-panel interface
- GPIO/AUX Port - Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port
- Amplifier Type - Power Amplifier
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 16 ohm
- Signal to Noise Ratio: 108 dB
- Total Harmonic Distortion + Noise (THD+N): 0.35 %
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Depth: 12.25 in
- Height: 3.50 in
- Width: 19 in
- Product Weight: 16.13 lbs
- Noise: 51 dBA
Suggested Products
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com