Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Flex-Mount Universal Projector Mount
Model: PCMK-Flex
- The Flex-Mount consists of a steel interface plate with four adjustable arms to position over the projector’s mounting holes.
- The unit includes two sets of adjustable arms: short and long for different configurations.
- Each arm has vertical adjustment to compensate for differing heights at mount points
- Superior to a ball joint design, pitch and tilt can be adjusted independently
- Can be flush-mounted with enclosed ceiling plate or attached to a 2” NPT schedule 40 pipe
Compare
Project List
Product Info
Tech Specs
Documents
The PCMK-Flex is a standard universal mount that is designed for many smaller projectors up to 40 lbs. It can be mounted flush to the ceiling, or attached to an optional pipe for installations requiring longer lowering distances.
- The Flex-Mount consists of a steel interface plate with four adjustable arms to position over the projector’s mounting holes.
- The unit includes two sets of adjustable arms: short and long for different configurations.
- Each arm has vertical adjustment to compensate for differing heights at mount points
- Superior to a ball joint design, pitch and tilt can be adjusted independently
- Can be flush-mounted with enclosed ceiling plate or attached to a 2” NPT schedule 40 pipe
- Quick-release for easy projector service
- Includes common projector mounting hardware
- Stylish black finish
- Projector Mount Type - Ceiling
- Projector Mount Movement - Fixed
- Warranty - Yes
- Spec Sheet available - Yes
- Maximum Load Capacity: 40 lbs
- Pitch (Minus): -15 degrees
- Pitch (Plus): 15 degrees
- Tilt (Minus): -15 degrees
- Tilt (Plus): 15 degrees
- Yaw (Minus): -360 degrees
- Yaw (Plus): 360 degrees
- Depth: 6 in
- Height: 4.50 in
- Width: 8 in
- Product Weight: 3.20 lbs
- Warranty (Length/Type): 1 Year
- Maximum Lift Capacity: 15 lbs
- Weight Capacity: 15 lbs
- Maximum projector hole spacing: 15 x 13 inch
- Minimum projector hole spacing: 8 x 6 inch
- Maximum vertical compensation: 1.5 inch
- 4) Short arms: 4 inch
- 4) Long arms: 6.3 inch
- Mounting hardware kit includes 4 each of: M3 x 12, M4 x 12, M5 x 12, M6 x 12
Proj ceiling mounts
7004 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close

McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Display Devices
Model: PCMK-Flex
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you