Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2028-B-B01
Series: Handheld Microphones
Model: 2028-B-B01
- Built for life on the road:
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
Product Info
Tech Specs
The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Just plug it in and hear the vocals shine like never before. This handheld mic has a wired XLR termination.
- Built for life on the road:
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
- Uniform supercardioid directionality
- Extreme SPL handling
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Supercardiod
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 117 dB
- Maximum SPL (Sound Pressure Level): 160 dB
- Product Weight: 0.63 lbs
- Additional Specifications:
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range, +/-2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
Sensitivity, nominal, +/-3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
Rated output impedance: 150 ohm
Minimum load impedance: 1 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
Power supply (for full performance): 48 V Phantom power (+/-4 V)
Current consumption: Max 2.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Diameter: 48 mm (1.9 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 188 mm (7.4 in)
Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
Polarity: +V at pin 2 for positive sound pressure - Height: 1.44 in
- Depth: 5.51 in
- Width: 9.84 in
- Shipping Height (with packaging): 5.51 in
- Shipping Width (with packaging): 9.84 in
- Shipping Weight: 2.76 lbs
- Shipping Depth (with packaging): 2.76 in
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 2028-B-B01
Request more information from a dealer near you
close
Request more information from a dealer near you