Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2028-B-SE2
Series: Handheld Microphones
Model: 2028-B-SE2
- Built for life on the road:
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
Product Info
Tech Specs
The 2028 Vocal Microphone is designed for the unique challenges of live stage performances. It is a flexible handheld vocal mic, which provides transparent, fantastic vocals to performers from a wide range of markets including live, HoW, broadcast, etc. Just plug it in and hear the vocals shine like never before. This handheld mic has an adapter that fits Sennheiser 2000/6000/9000/evolution/D1 wireless systems.
- Built for life on the road:
- Renowned DPA sound
- Natural vocals – from folk to metal
- Reduces feedback issues
- Rugged enough for the live stage
- Uniform supercardioid directionality
- Extreme SPL handling
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Supercardiod
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 117 dB
- Maximum SPL (Sound Pressure Level): 160 dB
- Additional Specifications:
Principle of operation: Pressure gradient
Cartridge type: Pre-polarized condenser
Frequency range, +/-2 dB, at 12 cm (4.7 in): 100 Hz - 16 kHz. Permanent 3rd order low-cut filter at 80 Hz
Sensitivity, nominal, +/-3 dB at 1 kHz: 5 mV/Pa; -46 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 22 dB(A) re. 20 µPa (max. 23 dB(A))
Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL peak
Rated output impedance: 150 ohm
Minimum load impedance: 1 kohm
Cable drive capability: 100 m (328 ft)
Output balance principle: Impedance balancing with Active Drive
Common mode rejection ratio (CMRR): > 50 dB at 1 kHz
Power supply (for full performance): 48 V Phantom power (+/-4 V)
Current consumption: Max 2.5 mA
Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
Diameter: 48 mm (1.9 in)
Capsule diameter: 19 mm (0.75 in)
Microphone length: 188 mm (7.4 in)
Maximum output voltage, RMS: 9 Vrms; 19 dBV; 28 dBu
Polarity: +V at pin 2 for positive sound pressure - Height: 1.03 in
- Depth: 5.51 in
- Width: 9.84 in
- Shipping Height (with packaging): 5.51 in
- Shipping Width (with packaging): 9.84 in
- Shipping Weight: 2.76 lbs
- Shipping Depth (with packaging): 2.76 in
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 2028-B-SE2
Request more information from a dealer near you
close
Request more information from a dealer near you