Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4006C
Series: Pencil Microphones
Model: 4006C
- Modular
- Omnidirectional
- Compact
Compare
Project List
Product Info
Tech Specs
Related Products
The 4006 Omni Mic offers total transparency in any recording situation. It picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and linear frequency response from 10 to 20 kHz (±2 dB). This mic is linear and true in character. It has earned its status as a worldwide recording standard and is the most popular mic in our Recording Microphone Series. This highly sought after mic has forged its enviable reputation over the past quarter of a century by repeatedly exhibiting its total transparency in any recording situation. This is a very flexible solution. Engineers, broadcasters and musicians alike can achieve clean, natural and precise sound reproduction. This mic is ideal for A-B stereo pairs for symphonic concert hall recordings. It also excels on vocals, for close miking all types of instruments.
- Modular
- Omnidirectional
- Compact
- Polar/Pickup Pattern - Omnidirectional
- Warranty - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): -40 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 119 dB
- Impedance: 2000 ohm
- Maximum SPL (Sound Pressure Level): 140 dB
- Sensitivity: -28 dB
- Signal to Noise Ratio: 79 dB
- Height: 2.52 in
- Product Weight: 0.14 lbs
- Warranty (Length/Type): 5-Years
- Principle of operation: Pressure
- Cartridge Type: Pre-polarized condenser
- Frequency Range: 10 to 20 Hz to kHz
- Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
- Total Harmonic Distortion (THD): <1 % up to 134 dB SPL peak
- Switchable attenuator: 0/-20 dB
- Output Impedance: <200 ohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >50 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Output voltage, RMS: >4 V
- Polarity: +V at Pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: ±0.5 dB
- Phase deviation for kit: <5 °
- Shipping Height (with packaging): 8 in
- Shipping Width (with packaging): 2 in
- Shipping Weight: 2 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 4006C
Request more information from a dealer near you
close
Request more information from a dealer near you