Pro AV Catalog
				
	
	
	
	
	
	
Manufacturers
		
	
	
	
	PRODUCT CATEGORIES
		
	
	
	
	
	
		Matching Keywords
			
		
		
		
	
	Model Numbers
		
	
	
 
				
			 Request Quote
							
								All Products
							
						4011A
Series: Pencil Microphones
Model: 4011A
- Modular
- Cardioid
				
					
							
	            
	                Compare
	            
				
	        
		
					Project List
				
			Product Info
	
				
					Tech Specs
				
					Documents
				
			
					This amazing cardioid mic is renowned in recording studios and live applications around the world as an exceptional mic. State-of-the-art components have been carefully selected to provide optimal neutrality, accuracy and extremely low distortion. 
						
							
					
				
			- Modular
- Cardioid
- Polar/Pickup Pattern - Cardiod
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): -40 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Dynamic Range: 121 dB
- Maximum SPL (Sound Pressure Level): 159 dB
- Sensitivity: -40 dB
- Signal to Noise Ratio: 76 dB
- Warranty (Length/Type): 5 Years
- Principle of operation: Pressure gradient
- Cartridge Type: Pre-polarized condenser
- Frequency range20 to 20: Hz to kHz
- Equivalent noise level, A-weighted, re. 20 µPa: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
- Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB (A)
- Total Harmonic Distortion (THD): <1 % up to 139 dB SPL peak
- Minimum Load Impedance: 2 kohm
- Switchable attenuator: 0/-20 dB
- Output Impedance: <200 ohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >60 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Output voltage, RMS: >5 V
- Polarity: +V at Pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: ±1 dB
- Phase deviation for kit: <10 °
- Color: Black
- Height: 1.27 in
- Depth: 6.10 in
- Width: 10.83 in
- Shipping Height (with packaging): 6.10 in
- Shipping Width (with packaging): 10.83 in
- Shipping Weight: 2.76 lbs
- Shipping Depth (with packaging): 2.76 in
									 
										
										Cardioid Microphone 
										
										
											  1729 kb
										
											- Data Sheet 
								
								
					Project List
				
			 Request Quote
			
		Suggested Products
				 	Thank you!
				 
				 
				 	Someone will be in touch with you shortly.
				 
			
					Contact McCann Systems
				
			
				 	
				 		close
				 	
				 	
				 
			
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
						
						
						DPA Microphones, Inc.
						
						Model: 4011A
					
				US B2B Inquiries Only
				
				
				
				
					Request more information from a dealer near you
				
			
					
						close
					
					
				
			
					Request more information from a dealer near you
				
			