Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
5006-11A
Series: Surround Sound Microphones
Model: 5006-11A
Compare
Project List
Product Info
Tech Specs
Documents
A complete surround kit combining three 4006A Omnidirectional Microphones and two 4011A Cardioid Microphones, carefully factory-matched to achieve full precision. Even though the standard tolerances on the Microphone Series are extremely low, the surround match is even closer. The specially-selected 4006As are matched within ±0.5 dB on both frequency response and sensitivity. The 4011As are matched within ±1 dB. The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings.
- Microphone Type - Condenser
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 122 F
- Operating Temperature (Minimum): -40 F
- Warranty (Length/Type): 5 Years
- Directional characteristics: 4006A: omnidirectional. 4011A: cardioid
- Principle of operation: 4006A: pressure. 4011A pressure gradient
- Frequency Range: 10 to 20 Hz to kHz
- Frequency range, ± 2 dB: 4006A: 10 Hz to 20 kHz. 4011A: 40 Hz to 20 kHz
- Sensitivity, nominal, ±2 dB at 250 Hz: 4006A: 40 mV/Pa; -28 dB re. 1 V/Pa
- Sensitivity, nominal ±2 dB at 1 kHz: 4011A: 10 mV/Pa; -40 dB re. 1 V/Pa
- Equivalent noise level, A-weighted: 4006A: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A)). 4011A: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
- Equivalent noise level, ITU-R BS.468-4: 4006A: Typ. 27 dB (max. 29 dB). 4011A: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL: 4006A: Typ. 79 dB(A). 4011A: Typ. 76 dB(A)
- Total Harmonic Distortion (THD): <1 % up to 139 dB SPL peak
- Minimum Load Impedance: 2 kohm
- Dynamic Range: 4006A: Typ. 124 dB. 4011A: Typ. 121 dB
- Max. SPL, peak before clipping: 4006A: 147 dB. 4011A: 159 dB
- Switchable attenuator: 0dB/-20dB
- Output Impedance: <200 ohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >60 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Weight: 4006A: 163 g (5.7 oz). 4011A: 158 g (5.6 oz)
- Diameter: 4006A: 16 to 19 mm (0.63 to 0.75 in). 4011A: 19 mm (0.75 in)
- Capsule Diameter: 4006A: 16 mm (0.63 in). 4011A: 19 mm (0.75 in)
- Output voltage, RMS: >5 V
- Polarity: +V at Pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: 4006A: ± 0.5 dB. 4011A: ± 1 dB
- Phase deviation for kit: 4006A: < 5°. 4011A: < 10°
- Shipping Height (with packaging): 10 in
- Shipping Width (with packaging): 12 in
- Shipping Weight: 10 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Surround Kit
1645 kb
- Data Sheet
Project List
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 5006-11A
Request more information from a dealer near you
close
Request more information from a dealer near you