Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
5015A
Series: Surround Sound Microphones
Model: 5015A
Compare
Project List
Product Info
Tech Specs
Documents
This is a complete Surround Kit with five carefully factory-matched . Even though the standard tolerances on the 4015s are extremely low, the surround match is even closer. The specially selected 4015 Wide Cardioid Microphones are matched within ±1 dB on both frequency response and sensitivity from mean of set. Recording orchestras or other acoustic ensembles sometimes requires a compromise between blending in the room reverberation and a more precise localization. The natural response and dynamic range make this Surround Kit an obvious choice for precise tone quality and wide dynamic range. This is a great solution for AB, Decca Tree or surround main arrays like our Wide Cardioid Surround Array.
- Microphone Type - Condenser
- Polar/Pickup Pattern - Cardiod
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): -40 F
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 40 Hz
- Minimum Frequency Response (Bandwidth): 0.04 kHz
- Dynamic Range: 121 dB
- Maximum SPL (Sound Pressure Level): 159 dB
- Sensitivity: -40 dB
- Signal to Noise Ratio: 76 dB
- Product Weight: 0.35 lbs
- Warranty (Length/Type): 5 Years
- Principle of operation: Pressure gradient
- Frequency Range: 20 - 20 Hz - kHz
- Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
- Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
- Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
- Max. SPL, peak before clipping: 159 dB
- Switchable attenuator: 0dB/-20dB
- Output Impedance: <200 ohm
- Minimum Load Impedance: 2 kohm
- Output balance principle: Impedance balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): >60 dB
- Power supply (for full specifications): 48 V Phantom power (± 4 V)
- Current Consumption: 2.80 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Output voltage, RMS: >5 V
- Polarity: +V at pin 2 for positive sound pressure
- Relative Humidity (RH): Up to 90 %
- Matching tolerance: ±1 dB
- Phase deviation for kit: <10 °
- Shipping Height (with packaging): 10 in
- Shipping Width (with packaging): 12 in
- Shipping Weight: 10 lbs
- Shipping Depth (with packaging): 12 in
- Color: Black
Surround Kit
1648 kb
- Data Sheet
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
DPA Microphones, Inc.
Model: 5015A
Request more information from a dealer near you
close
Request more information from a dealer near you