8 inch Speaker, 90x60 Weatherized, Black
Model: EVC-1082-96PIB
- 8-inch, two-way loudspeaker, with 90 x 60 degree constant directivity, rotatable waveguide
- Power rating: 200 W Continuous, (800 W Peak)
- Passive system: 91 dB, 120 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end in 70V/100V lines
EVC loudspeakers from Electro-Voice are two-way systems that can be used in a broad range of applications where wide bandwidth, vertical and horizontal directivity control, and high efficiency are required in a compact, cost-effective package. EVC loudspeakers are voiced to complement other EV-Innovation models (EVF, EVH, EVA, and EVU). The high frequency section of EVC loudspeakers comprises a single 1¼-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a modified fourth-order design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range. The EVC series is an extremely cost-effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 suspension points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG (6 mm). The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts. For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK-150 audio transformer. Adding a TK-150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. An EVC loudspeaker with a transformer installed sounds virtually identical to the same model without a transformer.
- 8-inch, two-way loudspeaker, with 90 x 60 degree constant directivity, rotatable waveguide
- Power rating: 200 W Continuous, (800 W Peak)
- Passive system: 91 dB, 120 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end in 70V/100V lines
- Rackmountable - Yes
- Spec Sheet available - Yes
- Connectors: Dual four-pin 10 AWG Phoenix/Euro Block screw-terminals
- Depth: 10.91 in
- Height: 19.37 in
- Impedance: 8 ohm
- Sensitivity: 91 dB
- Width: 9.76 in
- Shipping Weight: 28 lbs
- Grille: 18 GA powder coated steel with rotatable logo
- Suspension: (8) M10 suspension points
- Maximum SPL (Sound Pressure Level): 120 dB
- Passive Crossover Frequency: 1.85 kHz
- Peak Power: 800 Watt
- Product Weight: 24.69 lbs
- Active Power: 200 Watt
- Coverage Horizontal: 90 degrees
- Coverage Vertical: 60 degrees
- Color: Weatherized Black
- Construction: Plywood
- Minimum Frequency Response (Bandwidth): 75 Hz
- Minimum Frequency Response (Bandwidth): 0.08 kHz
- Maximum Frequency Response (Bandwidth): 21000 Hz
- Maximum Frequency Response (Bandwidth): 21 kHz
- Finish: EV Coat
- Speaker Diameter (Driver): 1.25 in
- Rec. High-Pass Frequency: 50 Hz
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com