Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1RU Rack-mount Digital Display - Green LEDs
Model: 1201DD-G
- Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
- Built-in quartz time base oscillator with battery back-up
- May be operated as a timecode reader for use with countdowns
- Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
- IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The 1200DD & 1201DD are LED digital clocks with 7-segment-digits display.They may operate as a timecode-reading clock or as a SMPTE ST 12-1 linear timecode reader, simply displaying the input timecode.In addition to SMPTE ST 12-1 timecode, the clocks can operate on the internal quartz time base from IRIG-B, a GPS antenna or NTP.This multi-way reference capability allows easy integration into new or existing clock systems.The model 1200DD clock face has 2.25" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF, depending on the control settings.The model 1201DD clock face has 1.00" tall digits that may display HH:MM:SS AM/PM or HH:MM:SS FF depending on the control settings.The brightness of the digital LEDs is adjustable.
- Competely self-setting with SMPTE ST 12-1 LTC timecode input or battery back-up
- Built-in quartz time base oscillator with battery back-up
- May be operated as a timecode reader for use with countdowns
- Digital display is user-selectable between HH:MM:SS, 12/24 hour, HH:MM:SS FF and date
- IRIG reader reads 1kHz IRIG-B format sine wave amplitude modulated code (format B122)
- Optional GPS receiver
- May be configured as a timecode generator to drive other clocks
- LED brightness is adjustable
- Runs on 50/60Hz, 115/230V AC power line
- User-programmable time offsets
- Rack mountable
- VistaLINK® control for device configuration and status monitoring
- Programmable daylight savings time start & end times
- NTP client
- Standard red LEDs (Green Optional -G)
- Compatible with Evertz UDT protocol
- Rackmountable - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): -22 F
- AC Voltage: 240 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 15 Watt
- DC Voltage: 12 Volts
- Depth: 2.76 in
- Height: 1.77 in
- Width: 19.02 in
- Product Weight: 2 lbs
- Color: Green
- Standard: SMPTE ST 12-1 linear time code - 24, 25 or 30 Fps
- Impedance: > 30 ohm, balanced
- Connector: 3 pin female XLR
- Level: 1V to 4.5V p-p
- Baud Rate: 57.6kbaud
- Format: 8 data bits, no parity, 2 stop bits
- Accuracy: < 2 seconds per day with power on, no timecode preset < 10 seconds / day with power removed
- Time Zone Offset: 0 to 23.5 hours in 0.5 hour increments Set with menu
- Network Type: Ethernet 100 Base-TX IEEE 802.3u standard for 100Mb/s baseband, CSMA/CD local area network
- Ethernet 10 Base-T IEEE 802.3 standard for 10Mb/s baseband, CSMA/CD local area network:
- NTP Standard: FRC-1305 compliant, client mode support
- Type: CR-2032 3 volt lithium cell
- Life expectancy: > 5 years
- Rackmountable: Yes
Rack-mount Digital Display
49 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 1201DD-G
Request more information from a dealer near you
close
Request more information from a dealer near you