Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
L-Band Standalone Fiber Transmitter with SmartMON™, CWDM DFB Laser, 50? BNC Connectors
Model: 2408LTxx-B50
- Directly mount to antenna structure or other outdoor locations
- -WP Weatherproof version - does not require secondary enclosure
- Wide frequency range for extended L-Band and over the air DTV signals
- Protocol independent design - transports all modulation formats
- DC pass through and 13VDC modes for LNB power
Compare
Project List
Product Info
Tech Specs
Documents
The 2408LTxx-B50 is an outdoor fiber optic transmitter for RF signals in the satellite L-Band or wider frequency range. It accepts a single RF input on coaxial cable and provides a single output for optical transmission. Packaged in a compact, standalone enclosure, the 2408LT is ideal for mounting on or near the satellite dish antenna structure. The -WP version features dust and water protection allowing outdoor mounting without a secondary enclosure. A full-power RF monitor output provides a convenient means of obtaining peak satellite signal strength, or additional signal distribution.
- Directly mount to antenna structure or other outdoor locations
- -WP Weatherproof version - does not require secondary enclosure
- Wide frequency range for extended L-Band and over the air DTV signals
- Protocol independent design - transports all modulation formats
- DC pass through and 13VDC modes for LNB power
- LNB current limit & short circuit protection
- LNB current monitoring
- Minimizes coaxial cable length for superior CNR performance
- 22kHz tone on/off for LNB local oscillator control
- RF monitor output for signal peaking and signal distribution
- Manually adjustable or AGC gain modes
- Tri-color LED status indicators for Link RF drive strength, LNB voltage and DC input voltage level
- SmartMON™ capability provides remote status monitoring via SNMP without a separate data connection
- Fiber link provides electrical isolation between antenna and facility mitigating ground loop and lightning issues
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 140 F
- Operating Temperature (Minimum): -4 F
- Maximum Frequency Response (Bandwidth): 3000000 kHz
- Maximum Frequency Response (Bandwidth): 3000000000 Hz
- Minimum Frequency Response (Bandwidth): 850000 kHz
- Minimum Frequency Response (Bandwidth): 850000000 Hz
- Active Power: 2 Watt
- DC Voltage: 18 Volts
- Height: 1.20 in
- Width: 2.40 in
- Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
- RF Input Number of Inputs: 1
- RF Input Connector: F-Type (50ohm BNC Optional)
- RF Input Conductor Range: 23-18 AWG (0.26-0.82 mm2)
- RF Input Input impedance: 75 ohm (50ohm Optional)
- Frequency Range 1310nm FP Laser: 850 to 3000 MHz
- Frequency Range CWDM DFB Laser: 850 to 3000 MHz
- Return Loss 120MHz to 500MHz: > 11dB
- Return Loss 500MHz to 3GHz: > 15dB
- Input Power Range: -10dBm to -50dBm
- Manual Gain Range: +2dB to +30dB in 2dB steps
- AGC Hold Range: -8dB to -38dBm ±2dBm
- Input IP3: +10dBm
- IMD: < -55dBc at -15dB input and minigain
- LNB Power Voltage: DC Input-0.5VDC, 13.5VDC, off (selectable)
- LNB Power Current: 500 mA
- LNB Power Protection: Short Circuit, current limited
- LNB Power LO Control: 22kHz on/off (selectable)
- RF Monitor Output Number of Outputs: 1
- RF Monitor Output Connector: F-Type (50ohm BNC Optional)
- RF Monitor Output Conductor Range: 23-18 AWG (0.26-0.82 mm2)
- RF Monitor Output Output Impedance: 75 ohm (50ohm Optional)
- RF Monitor Output Return Loss: > 15 dB
- RF Monitor Output Output Level: Within -2dB of input signal
- Optical Output Number of Outputs: 1
- Optical Output Connector: Female FC/APC
- Optical Output Operating Wavelength:
- Optical Output Standard: 1310 Nm
- Optical Output CWDM: 1270-1610 Nm
- Output Power Standard 1310nm: +2dBm
- Output Power CWDM: +2dBm
- Output Power RF System Performance2408LT + 7708LRA pair:
- Flatness 950MHz to 2150MHz: ±1.5dB
- Flatness 120MHz to 3GHz: ±2.0dB
- Flatness 326MHz BW to 2.3GHz: ±0.25dB
- Flatness Gain Variation Over Temperature: ±2dB (from -20°C to +70°C)
- DC Input Voltage: +18VDC nominal, +11V DC to +20V DC range (> LNB min input voltage required when powering an LNB)
- DC input power: 2 Watts max excluding LNB Power
- DC Input Connector: F-Type
- DC Input Conductor Range: 23-18 AWG (0.26-0.82 mm2)
- Temperature 1310nm: -20 to +70 °C
- Temperature CWDM: -20 to +60 °C
- Temperature Dust & Water Protection: IP65 (-WP version only)
- Wavelengths CWDM: 1270,1290,1310,1330,1350,1370,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610 Nm
L-Band Outdoor Fiber Transmitter
98 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 2408LTxx-B50
Request more information from a dealer near you
close
Request more information from a dealer near you