Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1 x 8 HD/SD-SDI Non-Reclocking Distribution Amplifier
Model: 500DA-HD-N
- Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
- Jumper Selectable mode for DVB-ASI
- Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
- Fully hot-swappable from front of frame with no BNC disconnect required
- Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
Compare
Project List
Product Info
Tech Specs
Documents
The Evertz 500DA-HD-N Non-Reclocking Distribution Amplifier provides reliable distribution of your HD and sd SDI video signal at rates of 1.5Gb/s and 143Mb/s to 540Mb/s. The DA features an auto-equalized input with eight serial outputs. The 500DA-HD-N has been designed for use as a SMPTE ST 292-1 (1.5Gb/s), DVB-ASI, SMPTE ST 259, or SMPTE ST 310 distribution product. The 500DA-HD-N DAs are housed in the 3RU 500FR frame that will hold up to 16 modules.
- Normal mode for SMPTE ST 259 (143 Þ 540Mb/s) or SMPTE ST 292-1 (1.5Gb/s) signals - autodetects correct bitrate
- Jumper Selectable mode for DVB-ASI
- Jumper selectable non-reclock mode for SMPTE ST 310 (19.4Mb/s) signals or any other SDI signal within the 143Mb/s to 1.5Gb/s range
- Fully hot-swappable from front of frame with no BNC disconnect required
- Independent isolated output drivers to ensure no cross channel loading effects (i.e. no need to terminate unused outputs)
- Tally output on Frame Status bus upon loss of input signal for quality monitoring
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
- Spec Sheet available - Yes
- Standard: SMPTE ST 292-1 (1.5Gb/s), SMPTE ST 259 (143 to 360Mb/s), SMPTE ST 344 (540Mb/s), DVB-ASI
- Connector: BNC per IEC 61169-8 Annex A
- Equalization: Automatic to 110m @ 1.5Gb/s with Belden 1694A (or equivalent); Automatic to 350m @ 270Mb/s with Belden 1694A (or equivalent)
- Return Loss: > 15dB up to 1.0Gb/s; > 10dB up to 1.5Gb/s
- Number of Outputs: 8 (optionally reclocked)
- Signal Level: 800mV nominal
- DC Offset: 0V ±0.5V
- Rise and Fall Time: 200ps nominal
- Overshoot: < 10% of amplitude
- Wideband jitter: < 0.2UI
- Voltage: +12V DC
- Power: 5 Watts
- EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
- Number of Slots: 1
HD/SD-SDI Reclocking & Non-Reclocking Distribution Amplifier
56 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 500DA-HD-N
Request more information from a dealer near you
close
Request more information from a dealer near you