Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
SDI Monitoring Reclocking Distribution Amplifier
Model: 500VMDA
- Fully hot-swappable from front of frame with no BNC disconnect required
- Tally output on Frame Status bus upon loss of input signal
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
- Selectable NTSC pedestal on/off
- Passes embedded audio to SD-SDI output
Compare
Project List
Product Info
Tech Specs
Documents
The Evertz 500VMDA Reclocking Distribution Amplifier provides inexpensive distribution and monitoring of your SMPTE ST 259 (270Mb/s) serial digital video signal. The DA features an auto-equalized input with nine outputs that can be selected as either SDI or composite analog. The 500VMDA in conjuction with the 510DCDA-HD gives an upgrade path to monitoring future HD-SDI signals without having to rewire your installation. The 500VMDA is housed in the 3RU 500FR frame that will hold up to 16 modules.
- Fully hot-swappable from front of frame with no BNC disconnect required
- Tally output on Frame Status bus upon loss of input signal
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
- Selectable NTSC pedestal on/off
- Passes embedded audio to SD-SDI output
- Supports SMPTE ST 259-C (270Mb/s) video with embedded audio
- 9 outputs selectable as SD-SDI or composite analog (NTSC/PAL)
- Independent isolated output drivers to ensure no cross channel leading effects (i.e. no need to terminate unused outputs)
- Selectable NTSC pedestal on/off
- Passes embedded audio to SD-SDI output
- Card Edge LED's: Reclocker Locked, Max. Equalization Warning, Module Health Status, Video present, cable length warning, and video standard LEDs
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 259-C (270Mb/s) 525 or 625 line
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Equalization: Automatic to 430m @ 270Mb/s with Belden 1694A or equivalent cable
- Serial Video Input - Return Loss: > 15dB up to 270Mb/s
- Serial Video Input - Embedded Audio: SMPTE ST 272-A
- Serial Video Input - Number of Outputs: Up to 9 reclocked outputs (jumper selectable)
- Serial Video Output - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Output - Signal Level: 800mV nominal
- Serial Video Output - DC offset: 0V ±0.5V
- Serial Video Output - Rise and Fall Time: 470ps nominal
- Serial Video Output - Overshoot: < 10% of amplitude
- Serial Video Output - Return Loss: > 15dB up to 270Mb/s
- Serial Video Output - Wideband Jitter: < 0.2UI
- Analog Video Output - Standard: NTSC, SMPTE ST 170 if input is 525i/59.94; PAL-B ITU-R BT 1700 if input is 625i/50
- Analog Video - Number of Outputs: Up to 9 (jumper selectable)
- Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output - Signal level: 1V p-p nominal
- Analog Video Output - DC Offset: 0V ±0.1V
- Analog Video output - Return loss: > 35dB up to 5MHz
- Voltage: +12V DC
- Power: 6 Watts
- EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
- Number of Slots: 1
SDI Monitoring Reclocking Distribution Amplifier
46 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 500VMDA
Request more information from a dealer near you
close
Request more information from a dealer near you