Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analog Video Distribution Amplifier with Cable Equalization (1 x 9)
Model: 501ADA-EQ
- 75 Ohms or high impedance input (jumper selectable)
- High common mode range and common mode rejection ratio (CMRR)
- Gain Control
- Jumper selectable AC or DC coupling
- Jumper selectable fast or slow back porch clamp
Compare
Project List
Product Info
Tech Specs
Documents
The 501ADA-EQ Analog Distribution Amplifier is a general purpose amplifier for distributing 75 Ohms analog video signals. The 501ADA-EQ features one balanced equalized input with nine unbalanced outputs. The 501ADA-EQ amplifier has been designed to distribute a wide range of analog video signals. It can also distribute other pulses and signals that are less than 2V p-p. The 501ADA-EQ is housed in the 3RU 500FR frame that will hold up to 16 modules.
- 75 Ohms or high impedance input (jumper selectable)
- High common mode range and common mode rejection ratio (CMRR)
- Gain Control
- Jumper selectable AC or DC coupling
- Jumper selectable fast or slow back porch clamp
- DC level control when clamp is enabled
- Cable equalizer adjustment range: 0 to 300m of Belden 8281 or 1694
- Looping feature with extenal "T" connector
- Consistent input impedance if card power is lost
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 500FR frame with 500FC VistaLINK® Frame Controller
- Card Edge LED's: Module Status/Local Fault, Power Supply Status, EQ Warning
- Spec Sheet available - Yes
- Analog Video Input - Standards: Any analog video format, up to 2V p-p, and 30MHz bandwidth
- Analog Video - Number of Inputs: 1
- Analog Video Input - Connector: BNC per IEC 61169-8 Annex A
- Analog Video Input - Common mode range: > 6V p-p
- Analog Video Input - CMRR: > 70dB to 1kHz
- Analog Video Input - Signal Amplitude: 2.5V p-p max
- Analog Video Input - Cable Equalizer: 0 to 300m of Belden 8281 or 1694 cable
- Analog Video Input - Impedance: 75 Ohms terminated, 35k Ohms Hi-Z (jumper selectable)
- Analog Video Input - Coupling: AC or DC (jumper selectable)
- Analog Video Input - Return loss: > 40dB to 10MHz, > 30dB to 30MHz
- Analog Video Input - Clamp Range: > ±600mV
- Fast Clamp Attenuation of 60Hz: > 36dB
- Analog Video - Number of Outputs: 9
- Analog Video Output - Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output - Impedance: 75 Ohms
- Analog Video Output - Gain Control Range: ±5dB
- Analog Video Output - DC Level: < ±100mV (with DC coupling active and back porch clamp disabled)
- Analog Video Output - DC Level Control Range: < ±200mV (with back porch clamp enabled)
- Analog Video Output - Frequency Response: < ±0.05dB (no equalization); < ±0.09dB for 5 to 100m Belden 8281 or 1694 (to 5.5MHz); < ±0.15dB for 100 to 300m Belden 8281 or 1694 (to 5.5MHz)
- Analog Video Output - Differential Gain: < 0.17% 0 to 300m
- Analog Video Output - Differential Phase: < 0.19° 0 to 300m
- Analog Video Output - C/L gain inequality: < ±0.1% for all cable lengths
- Analog Video Output - C/L Delay: < ±2ns
- Analog Video Output - Isolation: 42dB to 10MHz, 32dB to 30MHz
- Analog Video output - Return loss: > 40dB to 30MHz
- Noise Performance (NTC7 Weighting RMS): < -78dB
- Noise Performance (15kHz to 5.5MHz RMS): < -70dB
- Voltage: +12V DC
- Power: 1.2 Watts
- EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
- Number of Slots: 1
Analog Video Distribution Amplifier with Cable Equalization
54 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 501ADA-EQ
Request more information from a dealer near you
close
Request more information from a dealer near you