Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Master SPG/Master Clock System Including 6 Bi-level/Tri-level Sync Outputs
Model: 5601MSC
- 6 independently timeable programmable reference outputs
- Bi-level or Tri-level outputs selectable
- 2 Independent LTC Time Code outputs
- LTC Input (optional on 5600MSC, standard on 5601MSC)
- Reference loop input for video and 10MHz/5MHz references
Compare
Project List
Product Info
Tech Specs
Documents
The 5600MSC and 5601MSC Master Sync and Clock Generators are both a broadcast quality master sync pulse generator (SPG) and a master clock. Each provides all of the synchronizing signals needed in a 21st century TV station or post production facility at the same time as solving the problem of locking the in-house master clock system to the master video sync pulse generator.On the 5600MSC, the master clock section provides a primary longitudinal time code (LTC) output on an XLR connector and a 9-pin D connector, as well as a secondary LTC output available only on the 9-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.On the 5601MSC, the master clock section provides two longitudinal time code (LTC) or optional IRIG outputs on XLR connectors and a 15-pin D connector. The time code may be set from the front panel or referenced to a number of different sources.
- 6 independently timeable programmable reference outputs
- Bi-level or Tri-level outputs selectable
- 2 Independent LTC Time Code outputs
- LTC Input (optional on 5600MSC, standard on 5601MSC)
- Reference loop input for video and 10MHz/5MHz references
- GPS option for frequency and time reference
- 3.58/4.43/5MHz frequency reference output (only on 5601MSC)
- 10MHz frequency reference output
- Wordclock output (optional on 5600MSC, standard on 5601MSC)
- Output frequency stability guaranteed better then 1.0 x 10-8 (or 0.01ppm)
- Optional modem for time reference dial up
- 2 GPS based units will be in time and phase even when remotely separated by miles
- Optional test generators available are (refer to ordering options): Composite Video, AES/DARS, Analog Audio Tones, SD SDI, HD SDI & 3Gb/s (only on 5601MSC)
- Optional Network Time Protocol (NTP) server support (GPS option should be ordered with NTP option)
- For 5600MSC, 16 character Alpha-numeric display, with 20 pushbuttons
- For 5601MSC, dual 6 line x 16 character Alpha-numeric display, with 10 pushbuttons
- Rack mountable
- Optional redundant power supply (redundant power hot-swappable only on 5601MSC)
- Automatic changeover units available for dual redundant systems applications
- Compatible with Dual GPS Data Fiber Receivers & Transmitters
- 2 factory presets and 3 user presets available
- VITC reader on reference input for time reference
- Ten Field Pulse is available on NTSC sync outputs
- VistaLINK® control for device configuration and status monitoring
- On 5601MSC, all active components are front panel extractable & serviceable
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 158 F
- Operating Temperature (Minimum): -40 F
- AC Voltage: 240 Volts
- AC Voltage (Maximum): 240 Volts
- AC Voltage (Minimum): 100 Volts
- Active Power: 90 Watt
- Depth: 11.50 in
- Height: 1.77 in
- Width: 19.02 in
- Product Weight: 8 lbs
- Color: Black
- Black Burst: SMPTE ST 170 (NTSC-M), ITU-R BT.1700-1 (PAL-B)
- Bi-Level: Slo-Pal 625i/48, 625i/47.95
- HD Tri-Level: SMPTE ST 274 (1080p/23.98, 1080p/24, 1080i/50, 1080i/59.94, 1080i/60, 1080p/23.98sF, 1080p/24sF, 1080p/25, 1080p/29.97, 1080p/30)SMPTE ST 296 (720p/59.94, 720p/60, 720p/50, 720p/24)
- Pulse Signals: PAL color frame, 1Hz pulse, 1/1.001Hz pulse, 6/1.001Hz pulse
- CW Signals: 5MHz, 10MHz, NTSC-M Subcarrier, PAL-B Subcarrier
- Wordclock: 48kHz Wordclock
- Connector: 6 BNC per IEC 61169-8 Annex A
- Number of Outputs: 6
- DC Offset: 0V ±0.05V
- Return Loss: > 40dB up to 10MHz
- SNR: > 75dB rms
- Output Levels: 1.0V p-p, 2.0V p-p, in 75 ohm, selectable
- Output Type: 10MHz sine wave (default), all other analog sync standards (see above) selectable
- SFDR: > 50 dBc
- Risetime: < 25ns
- Levels: 5V CMOS (1kohm) or ±1V (75?)
- Standard: SMPTE ST 12-1 or IRIG-B
- Frame Rate: 24, 25, 30 and 29.97 (drop frame and non-drop frame)
- Connectors: 3-pin male XLR type, Female DB-15
- Unpowered: Adjustable, 1.0V to 8.0V p-p, balanced
- Powered: 2V p-p with 11V DC offset to drive downstream 1200 series slave clocks
- Output Impedance: 44? balanced (unpowered)
- Rise Time: 40 ±10µs
- Jitter: < 2µs
- IRIG Input/Outputs+IRIG option Standard: IRIG B122, B123, B126, B127
- Level: 1.0-8.0 p-p, blanaced
- Number of Inputs: 1 balanced
- Input Impedance: > 30 kohm balanced
- Sensitivity: 0.25V p-p min
- Wide Mode: ±15ppm min
- Narrow mode: ±0.1ppm min
- Baud Rate: 115200 baud
- Format: 8 data bits, no parity, 2 stop bits
Master SPG/Master Clock System
332 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 5601MSC
Request more information from a dealer near you
close
Request more information from a dealer near you