Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8-channel HD/SD-SDI, AES & RS-232/422 Auto Change Over
Model: 7700ACO-HD
- Auto detection of signal standard
- Four modes of operation:Auto changeover - two standalone auto changeovers, Manual DIP switch control - two independently controlled 2x1 switchers, GPI Control - two independently GPI controlled 2x1 switchers, Tally output provided
- Protection for 8 channels of AES
- Control channels
- Protection on HD (1.5Gb/s) or SD (270Mb/s)
Compare
Project List
Product Info
Tech Specs
Documents
The Evertz 7700ACO-HD HD/SDI Auto Change Over is designed to provide a HD/SD SDI video, multi channel AES audio and RS-422/RS-232 change over in one device.The unit can be controlled via GPI, remotely via VistaLINK® PRO or set in autochangeover mode.It is an all-in-one ACO package aimed towards protecting a complete channel.(ie. protecting the video, 8 channels of discrete AES and associated control channel (RS-232 or RS-422)).The unit features latching relays that maintain state through loss of power.
- Auto detection of signal standard
- Four modes of operation:Auto changeover - two standalone auto changeovers, Manual DIP switch control - two independently controlled 2x1 switchers, GPI Control - two independently GPI controlled 2x1 switchers, Tally output provided
- Protection for 8 channels of AES
- Control channels
- Protection on HD (1.5Gb/s) or SD (270Mb/s)
- Protection for SMPTE ST 310
- Changeover conditions are based on signal presence of:HD/SDI (TRS timing, CRC and EDH), DVB-ASI (SMPTE sync word), Sync (H timing, AES (sync word)
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Controller module in slot 1 of the frame
- Spec Sheet available - Yes
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- Standard: SMPTE ST 292-1, SMPTE ST 259 A, B, C, D (143 to 540Mb/s) or DVB-ASI
- Number of Inputs: 2
- Connector: BNC per IEC 61169-8 Annex A
- Equalization: 100m of Belden 1694A or equivalent cable combined input and output
- Return Loss: 10dB up to 1.5Gb/s
- Number of Outputs: 1 passive relay output
- Maximum Cable Length: 60m of Belden 1694A or equivalent cable combined input and output
- DC Offset: 0V ±0.5V
- INPUT: Opto-isolated input with internal pull-up to +5V
- Output: Normally 10k internal pull-up to +5V. Ground to rear panel when relay is in active position
- Signal Level: +5V nominal
- Serial Port: RS-232/RS-422 - 4 wire
- Number of Ports: 4 pins
- Level: 1V p-p
- Impedance: 75 ohm
8-channel HD/SD-SDI, AES & RS-232/422 Auto Change Over
69 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7700ACO-HD
Request more information from a dealer near you
close
Request more information from a dealer near you