Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual HD/SD-SDI Smart Automatic Changeover
Model: 7700ACO2-HD
- Auto sensing of HD and SD input formats
- Smart Automatic changeover based on user programmable switch logic
- Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Bypass relay protection on main program output
Compare
Project List
Product Info
Tech Specs
Documents
The 7700ACO2-HD incorporates Evertz® essential audio and video monitoring which is used to drive the real time automatic switch logic processor.Common parameters include user configurable loss of signal, freeze, and black detect.The 7700ACO2-HD can optionally be ordered with Evertz's patented IntelliGain® Audio and Loudness Processor.The IntelliGain® processor is designed to normalize perceived differences in audio loudness in real time for any HD/SD-SDI signal with embedded audio.This module will internally de-embed the audio signals, regulate the signal level based on a used defined target loudness level, then re-embed the corrected audio signals back into the video output.
- Auto sensing of HD and SD input formats
- Smart Automatic changeover based on user programmable switch logic
- Card edge menu control for configuration of operating modes and LEDs for reporting signal presence, router state, module status
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Bypass relay protection on main program output
- Integrated SoftSwitchâ„¢ technology for clean video and "popless" embedded audio switching
- IntelliGain® Audio and Loudness Processor
- Consistent audio loudness levels within a channel and/or program
- Gain control within a program interval to preserve audio dynamic range
- Artifact-free transitions between program and commercials
- Elimination of drastic volume changes during commercials and interstitials
- Ideal for aggregator applications and multi-channel playout facilities (DTH, Cable, IPTV
- Spec Sheet available - Yes
- Active Power: 20 Watt
- DC Voltage: 12 Volts
- Standard: Auto-detects standard 1.485Gb/s SMPTE ST 292-1 (1080i/59.94, 1080i/50, 720p/59.94, 720p/50) SMPTE ST 260, SMPTE ST 274, SMPTE ST 296, SMPTE ST 349 (HD or SD carrier) 270Mb/s SMPTE ST 259-C (525i/59.94 or 625i/50)
- Number of Inputs: 2
- Connector: BNC per IEC 61169-8 Annex A
- Input Equalization: Automatic 100m @ 1.5Gb/s with Belden 1694 or Equivalent cable
- Return Loss: > 20dB up to 270MHz, > 12dB up to 1.5GHz
- Number of Outputs: 2 Smart switched program outputs (Input 1 is bypass relay protected) Loop thru on Input A and Input B
- Signal Level: 800mV nominal
- DC Offset: 0V ±0.5V
- Rise and Fall Time: 200ps nominal
- Overshoot: < 10% of amplitude
- Jitter: < 0.16 UI (HD)
Dual HD/SD-SDI Smart Automatic Changeover
94 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7700ACO2-HD
Request more information from a dealer near you
close
Request more information from a dealer near you