Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
VistaLINK® General Purpose Interface Module
Model: 7700GPI
- 20 opto-isolated General Purpose Interface inputs (GPI)
- Enabled GPI inputs/alerts translated and reported to Network Management System (NMS) user interface via SNMP
- Selectable +5V or +12V supply for driving GPI over longer cable runs
- 3 relay closure General Purpose Interface outputs (GPO)
- GPI/GPO easily accessed through pin-headers (2x6 Phoenix Terminal Blocks) on rear plate
Compare
Project List
Product Info
Tech Specs
Documents
The 7700GPI VistaLINK® General Purpose Interface module links third-party equipment and Evertz's VistaLINK® Network Management System (NMS). Third-party equipment with fault alarming capabilities through General Purpose Interface outputs (GPO) can communicate fault alarm conditions to the VistaLINK® application software through this GPO to SNMP translator thereby extending fault monitoring capabilities across the broadcast network.
- 20 opto-isolated General Purpose Interface inputs (GPI)
- Enabled GPI inputs/alerts translated and reported to Network Management System (NMS) user interface via SNMP
- Selectable +5V or +12V supply for driving GPI over longer cable runs
- 3 relay closure General Purpose Interface outputs (GPO)
- GPI/GPO easily accessed through pin-headers (2x6 Phoenix Terminal Blocks) on rear plate
- 1 LTC input for module synchronization of fault alarms to facility time
- Modular, conveniently fits into 7800FR 3RU frame
- Module status LED and 20 GPI LEDs for simple GPI input diagnositics
- Frame status trigger
- Jumper-configurable RS-232/RS-422 input serial COM port for serial protocol interface translation
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Spec Sheet available - Yes
- Number of Card Slots: 1
- Number of Inputs: 20
- Number of Outputs: 3
- Rack Units (Height): 3
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- Type: Opto-isolated, active low with jumper selectable +5V or +12V supplied voltage
- Connector: Phoenix Terminal Block (2 x 6)
- Signal Level: Jumper selectable +5V or +12V
- Number of Inputs: 1 ± pair
- Level: 100mV p-p
- Number of Ports: 1 RS-232 or 1 RS-422 (jumper selectable)
- Baud Rate: Up to 1Mbaud
VistaLINK® General Purpose Interface Module
66 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7700GPI
Request more information from a dealer near you
close
Request more information from a dealer near you