Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
VistaLINK® Third Party Interface Module
Model: 7700TPI
- 20 opto-isolated General Purpose Inputs (GPI)
- Enabled GPI alerts translated and reported to Network Management System (NMS) user interface via SNMP
- Selectable +5V or +12V supply for driving GPI over longer cable runs
- 8 relay closure General Purpose Outputs (GPO)
- 4 serial ports RS-232/422 selectable
Compare
Project List
Product Info
Tech Specs
Documents
The 7700TPI VistaLINK® module links third-party equipment and Evertz VistaLINK® Network Management System (NMS). Third-party equipment with fault alarming capabilities via General Purpose Outputs (GPO), serial RS-232/422/485 connection, or Ethernet can communicate fault alarm conditions to the VistaLINK® application software through the 7700TPI to SNMP translator thereby extending fault monitoring capabilities across the broadcast network.The 7700TPI comes equipped with 4 RS-232/422/485 serial ports and 1 10/100 Mb Ethernet port. These ports can also be utilized to communicate and provide remote control to third-party equipment.
- 20 opto-isolated General Purpose Inputs (GPI)
- Enabled GPI alerts translated and reported to Network Management System (NMS) user interface via SNMP
- Selectable +5V or +12V supply for driving GPI over longer cable runs
- 8 relay closure General Purpose Outputs (GPO)
- 4 serial ports RS-232/422 selectable
- GPI/GPO/Serial connections easily accessed through pin-headers (Phoenix Terminal Blocks) on rear plate
- Modular, conveniently fits into 7800FR 3RU frame
- Module status LED and simple GPI input diagnostics
- Frame status trigger
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FR frame - Frame Controller built-in
- Spec Sheet available - Yes
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- Number of Inputs: 20
- Type: Opto-isolated, active low with jumper selectable +5V or +12V supplied voltage
- Connector: Phoenix Terminal Block
- Signal Level: Jumper selectable +5V or +12V
- Number of Outputs: 8
- Number of Ports: 4 RS-232 or 3 RS-422
- Baud Rate: User selectable, up to 115200 bps
- EMI/RFI: Complies with FCC Part 15 Class A, EU EMC Directive
VistaLINK® Third Party Interface Module
72 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7700TPI
Request more information from a dealer near you
close
Request more information from a dealer near you