Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1x4 RF Active Splitter, 40MHz-3GHz
Model: 7702DA4A-RF
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
Compare
Project List
Product Info
Tech Specs
Documents
The 7702DA4A-RF 1x4 Active Splitters provide amplification and distribution of RF signals from 40MHz to 3GHz. The 7702DA4A-RF handle any RF input modulation format and provides 4 isolated outputs for further signal distribution. Typical applications include amplification and distribution of 950MHz - 2150MHz L-Band and 70MHz-140MHz IF signals. The 7702DA4A-RF occupy one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display
- Fixed RF gain of 0dB
- Spec Sheet available - Yes
- Input Impedance: 75 ohm
- Number of Inputs: 1
- Number of Outputs: 4
- Output Impedance: 75 ohm
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- RF Input Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF Input Return loss: > 13 dB
- RF Input Frequency Range: 40MHz to 3GHz
- RF Input Power Range: -10 to -60 dBm
- RF Input LNB Power: 13/18V DC selectable
- RF Input Current Limit: 400 mA
- RF Input LO Control: 22 kHz on/off
- RF Output Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF output Return loss: > 14 dB
- RF Output Gain: 0dB ±2dB
- SNR: > 55 dB @ -20dBm input power
- Frequency Response at 40MHz to 200MHz: ±0.25dB
- Frequency Response at 50MHz to 850MHz: ±0.5dB
- Frequency Response at 950MHz to 2150MHz: ±0.75dB
- Frequency Response at 40MHz to 3GHz: ±1dB
- Isolation(Output to Output): > 40 dB
- Number of Slots: 1
Splitter
75 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7702DA4A-RF
Request more information from a dealer near you
close
Request more information from a dealer near you