Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1x4 RF Active Splitter with LNB Power and VistaLINK®, 40MHz-3GHz
Model: 7703DA4A-RF-LNB
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
Compare
Project List
Product Info
Tech Specs
Documents
The 7703DA4A-RF-LNB 1x4 Active Splitters provide amplification and distribution of RF signals from 40MHz to 3GHz. The 7703DA4A-RF-LNB handle any RF input modulation format and provides 4 isolated outputs for further signal distribution. Typical applications include amplification and distribution of 950MHz - 2150MHz L-Band and 70MHz-140MHz IF signals. Monitoring of RF input power, card status and control gain / attenuation is provided remotely via VistaLINK® capability. Optional LNB power is available at the input connector on the this version.
- Low noise amplification and distribution of RF signals from 40MHz to 3GHz
- Wideband frequency response for use with L-Band, 70/140MHz IF and off-air DTV signals
- Wide dynamic range (-10 to -60dBm)
- Protocol independent - handles all modulation formats
- Fully hot-swappable from front of frame
- Comprehensive signal and card status monitoring via four digit card edge display
- Output gain of -10dB to +20dB adjustable in ½dB steps
- AGC mode with adjustable target level
- Input RF signal strength and LNB current monitoring indication
- Optional LNB power (@ +13V or +18V DC with built-in current limiting) and 22kHz tone for LO control
- Above option includes LNB current monitoring with adjustable alarm thresholds for monitoring LNB health
- Remote monitoring through SNMP and VistaLINK® capability
- Spec Sheet available - Yes
- Input Impedance: 75 ohm
- Number of Inputs: 1
- Number of Outputs: 4
- Output Impedance: 75 ohm
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- RF Input Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF Input Return loss: > 13 dB
- RF Input Frequency Range: 40MHz to 3GHz
- RF Input Power Range: -10 to -60 dBm
- RF Input LNB Power: 13/18V DC selectable
- RF Input Current Limit: 400 mA
- RF Input LO Control: 22 kHz on/off
- RF Output Connector: BNC per IEC 61169-8 Annex A (F-Type and SMA optional)
- RF output Return loss: > 14 dB
- RF Output Gain: -10dB to +20dB in 1/2dB steps
- SNR: > 55 dB @ -20dBm input power
- Frequency Response at 40MHz to 200MHz: ±0.75dB
- Frequency Response at 50MHz to 850MHz: ±0.75dB
- Frequency Response at 950MHz to 2150MHz: ±0.75dB
- Frequency Response at 40MHz to 3GHz: ±1.5dB
- Isolation(Output to Output): > 40 dB
- Number of Slots: 1
Splitter
75 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7703DA4A-RF-LNB
Request more information from a dealer near you
close
Request more information from a dealer near you