Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analog, SDI or HD Video with AES Audio Fiber Transmitter 1310nm, FP laser
Model: 7707ADVT13-HD
- Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
- Auto-sensing (analog or digital) video and audio inputs
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
- Supports both NTSC and PAL analog, or 4:2:2 component digital video
Compare
Project List
Product Info
Tech Specs
Documents
The 7707ADVT13-HD is a Analog, SDI or HD Video with AES Audio Fiber Transmitter 1310nm, FP laser. Fully hot-swappable from front of frame with no fiber disconnect/reconnect required. Supports single-mode and multi-mode fiber optic cable.
- Single card fiber optic transmitter for one composite analog or SDI video and four analog or AES signals
- Auto-sensing (analog or digital) video and audio inputs
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports HD (SMPTE ST 292-1) video @ 1.485Gb/s
- Supports both NTSC and PAL analog, or 4:2:2 component digital video
- Supports Analog to Digital and Digital to Analog audio conversion
- Broadcast quality analog video and audio performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video and audio transport
- Supports 32, 44.1, 48KHz AES audio inputs
- Dolby Eâ„¢ compatible
- Adjustable gain equalization for analog video for up to 250m of Belden 1694 coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1310nm, 1550nm and up to 16 CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Comprehensive signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Analog Video Input Standard: NTSC (SMPTE ST 170), PAL (ITU-R 624-2)
- Analog Video Input Number of Inputs: 1
- Analog Video Input Connector: BNC per IEC 61169-8 Annex A
- Analog Video Input Signal Quantization: 12 bits
- Analog Video Input System Bandwidth: > 5.5MHz
- Analog Video Input Level: 2V p-p (maximum)
- Analog Video Input Gain Equalization: Up to 250m of Belden 1694 or equivalent (adjustable)
- Analog Video Input Impedance: 75?
- Analog Video Input Return Loss: > 30dB to 5.5MHz
- Analog Video Input SNR: > 70dB
- Analog Video Input Differential Gain: < 1.0%
- Analog Video Input Differential Phase: < 0.7°
- Analog Video Input Passband Ripple:
- Analog Video Input NTSC: < ±0.1dB to 4.1MHz
- Analog Video Input: < ±0.2dB to 5.5MHz
- Analog Video Input PAL: < ±0.1dB to 4.8MHz
- Analog Video Input Chroma/Luma Gain: 98% to 103%
- Analog Video Input Chroma/Luma Delay:
- Analog Video Input Line Time Distortion: 0.012
- Standard: Same as Analog Video Input
- Analog Video Output Number of Outputs: 1
- Analog Video Output Connector: BNC per IEC 61169-8 Annex A
- Analog Video Output Level: 1V p-p
- Analog Video Output Impedance: 75?
- Analog Video Output Return Loss: > 30dB to 5.5MHz
- Serial Video Output Number of Outputs: 2 (1 loopback, 1 serial)
- Serial Video Output Connector: BNC per IEC 61169-8 Annex A
- Serial Video Output Signal Level: 800mV nominal
- Serial Video Output DC Offset: 0V ±0.5V
- Serial Video Output Rise/Fall Time: 900ps nominal @ 270Mb/s
- Serial Video Output: < 270ps @ 1.485Gb/s
- Analog Audio Input Number of Inputs: 4
- Analog Audio Input Type: Balanced analog audio
- Analog Audio Input Connector: 12-pin removable terminal block
- Analog Audio Input Impedance: High Impedance (> 20k?)
- Analog Audio Input Frequency Response: ±0.1dB, 20Hz to 20kHz
- Analog Audio Input THD: < 0.005%, 20Hz to 20kHz
- Analog Audio Input Channel Phase Differential: ±1°
- Analog Audio Input SNR (weighted): > 85dB
- Analog Audio Input Maximum Input Level: +24dBu
- Analog Audio Input Signal Quantization: 24 bits
- Optical Output Number of Outputs: 1
- Optical Output Return Loss: > 14dB
- Optical Output Rise/Fall Time: 200ps nominal
- Optical Output Fiber Size: 9µm core / 125µm overall
- Optical Output Wavelength:
- Optical Output Standard: 1310nm, 1550nm (nominal)
- Optical Output 1310nm FP (Standard): -7dBm ±1dBm
- Voltage: +12V DC
- Power: 16 Watts (Non-DWDM) or 19 Watts (DWDM)
- Number of Slots: 1
- Laser Safety: Class 1 laser product, complies with 24CFR 1040.10 and 1040.11, IEC 60825-1
- EMI/RFI: Complies with FCC Part 15, Class A, EU EMC Directive
- Active Power: 16 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15, Class A, EU EMC Directive (EMI/RFI), Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1,
4 Channel Analog or AES Audio Fiber Transmitter
82 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707ADVT13-HD
Request more information from a dealer near you
close
Request more information from a dealer near you