Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Analog Video + Audio + Bi-Directional RS-232/RS-422 Fiber Transmitter, Dual Fiber, 1310nm Laser
Model: 7707CVDTA13-A4-F2
- Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
- Supports both NTSC and PAL video signals
- Broadcast quality analog video and audio performance
- 2 bi-directional RS-232 or 1 bi-directional RS-422
- Superior digital data transmission
Compare
Project List
Product Info
Tech Specs
Documents
The 7707CVDTA13-A4-F2 is a VistaLINK® - capable composite analog video, 4-channel audio and bi-directional RS-232/422 fiber optic transmitter for broadcast quality video signals. The 7707CVDTA13-A4-F2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Single card fiber optic transmitter for analog video, four analog audio and bi-directional RS-232/422
- Supports both NTSC and PAL video signals
- Broadcast quality analog video and audio performance
- 2 bi-directional RS-232 or 1 bi-directional RS-422
- Superior digital data transmission
- Signal transport over fiber uninterrupted by loss of input video, audio or data feeds
- Adjustable gain equalization for up to 300m of Belden 1694A coaxial cable
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Optical output wavelengths of 1310nm, 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Active Power: 12 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Class 1 laser product, 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, Class A, EU EMC Directive (EMI/RFI)
- Analog Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
- Analog Video Input Number of Inputs: 1
- Analog Video Input Connector: BNC per IEC 61169-8 Annex A
- Analog Video Input Signal Quantization: 12 bits
- Analog Video Input System Bandwidth: 5.5MHz
- Analog Video Input Input Level: 2V p-p (Maximum)
- Analog Video Input Gain Equalization: Up to 300m of Belden 1694A or equivalent (adjustable)
- Analog Video Input Input impedance: 75 ohm
- Analog Video Input Return Loss: > 30dB to 5.5MHz
- Analog Video Outputs Standard: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
- Analog Video Outputs Number of Outputs: 1 buffered version of input
- Analog Video Outputs Connector: BNC per IEC 61169-8 Annex A
- Analog Video Outputs Output Level: 1V p-p
- Analog Video Outputs Output Impedance: 75 ohm
- Analog Video Outputs Return Loss: > 30dB to 5.5MHz
- Analog Audio Inputs Number of Inputs: 4
- Analog Audio Inputs Type: Balanced analog audio
- Analog Audio Inputs Connector: 12-pin removable terminal block
- Analog Audio Inputs Input impedance: High Impedance (> 20kohm)
- Analog Audio Inputs Max. Audio Input Level: +24dBu
- Analog Audio Inputs Signal Quantization: 24 Bits
- Analog Audio Inputs Freq. Response: ±0.1dB, 20Hz to 20kHz
- Serial Data Ports Number of Ports: 1 RS-422 or 2 RS-232 - Jumper Selectable
- Serial Data Ports Connector: 4 pins (plus ground) on 16-pin removable terminal block
- Serial Data Ports Baud Rate: Up to 3Mb/s (Determined by incoming data)
- Optical Input Number of Inputs: 1
- Optical Input Connector: Female SC/PC, ST/PC, FC/PC
- Optical Input Operating Wavelength: 1270nm to 1610nm
- Optical Input Max. Input Power: 0dBm
- Optical Sensitivity WDM (-W Version): -26dBm
- Optical Sensitivity Standard: -28dBm
- Optical Output Number of Outputs: 1
- Optical Output Connector: Female SC/PC, ST/PC or FC/PC
- Optical Output Return Loss: > 14dB
- Optical Output Rise and Fall Time: 200ps nominal
- Optical Output Fiber Size: 9µm core/125µm overall
- Wavelength Standard: 1310nm, 1550nm
- Wavelength CWDM: 1270nm - 1610nm
- Wavelength DWDM: C-Band (ITU-T G.694.1 compliant)
- Output Power 1310nm FP: -7dBm ±1dBm
- Output Power 1550nm (-W): -1dBm ±1dBm
- Output Power 1550nm, CWDM DFB: 0dBm ±1dBm
- Output Power DWDM DFB: +7dBm ±1dBm
- Video Input to Video Output Delay: < 10µs
- Audio Input to Audio Output Delay: < 1.9ms
Analog Video, 4-Channel Audio and RS-232 / 422 Fiber Transmitter
72 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707CVDTA13-A4-F2
Request more information from a dealer near you
close
Request more information from a dealer near you