Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Eight Analog Video Fiber Transmitter 1550nm DFB Laser, VistaLINK®
Model: 7707CVT15-8
- Single card fiber optic transmitter for up to eight analog video signals
- Supports both NTSC and PAL video signals
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Signal transport over fiber is uninterrupted by loss of input video feeds
Compare
Project List
Product Info
Tech Specs
Documents
The 7707CVT-8 is a VistaLINK® -capable, composite analog video fiber transmitter for broadcast quality video signals. This single card module accepts up to eight NTSC or PAL analog video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707CVR-8 Analog Video Fiber Receiver demultiplexes the signals and converts them back to analog form. The fiber optic output of the 7707CVT-8 is available in an assortment of optical wavelengths, accommodating 1310nm/1550nm, CWDM and DWDM transmission schemes. The 7707CVT-8 occupies two card slots and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Single card fiber optic transmitter for up to eight analog video signals
- Supports both NTSC and PAL video signals
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Signal transport over fiber is uninterrupted by loss of input video feeds
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Adjustable equalization for up to 250m of Belden 1694A coaxial cable
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelength of 1550nm
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Connector Type - ST-ST
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Analog Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
- Analog Video Number of Inputs: 8
- Analog Video Input Connector: BNC per IEC 61169-8 Annex A
- Signal Quantization: 12 bits
- System Bandwidth: 5.5 MHz
- Input Level: 2Vp-p (Maximum)
- Gain Equalization: up to 250m of Belden 1694A or equivalent (adjustable)
- Input Impedance: 75 ohm
- Analog Video Return Loss: > 30dB to 5.5MHz
- Signal/Noise Ratio: > 70dB
- Differential Gain: < 1.0%
- Differential Phase: < 0.7 degree
- Passband Ripple: NTSC < ±0.1dB to 4.1MHz, < ±0.2dB to 5.5MHz; PAL < ±0.1dB to 4.8MHz, < ±0.2dB to 5.8MHz
- Chroma/Luma Gain: 98 to 103 %
- Chroma/Luma Delay: NTSC < 5 ns, PAL < 12 ns
- Line Time Distortion: 1.2 %
- Optical Number of Outputs: 1
- Optical Return Loss: > 14dB
- Optical wavelengths: 1550 Nm
- Optical Output Power: 1550 DFB 0dBm ±1dBm
- Power: 13 W
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with 24 CFR 1040.10 and 1040.11 IEC 60825-1, FCC Part 15, EU EMC Directive
Eight Analog Video Fiber Transmitter
55 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707CVT15-8
Request more information from a dealer near you
close
Request more information from a dealer near you