Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
![Evertz - 7707EO-3-HD](https://cdn-images.av-iq.com/products/enlarge/7707EO-3-HD2.jpg)
Request Quote
All Products
19.4Mb/s to 1.485Gb/s Triple HD Electrical to Optical Converter
Model: 7707EO-3-HD
- Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatic cable equalization to 300m at 270Mb/s and 75m at 1.485Gb/s with Belden 1694A (or equivalent) cable
- Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s. Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s. Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s).
- Three independent channels of electrical to optical conversion that support all SMPTE ST 292-1 standards at 1.485Gb/s
- Supports all SMPTE ST 259 standards with operation from 143Mb/s - 360Mb/s
- Supports additional standards of SMPTE ST 305 (SDTi), SMPTE ST 310 (19.4Mb/s), SMPTE ST 344 (540Mb/s), M2S and DVB-ASI (270Mb/s)
- Automatic cable equalization to 300m at 270Mb/s and 75m at 1.485Gb/s with Belden 1694A (or equivalent) cable
- Fully hot swappable from front of frame, with no fiber or BNC disconnect /reconnect required
- High density - accommodates up to 45 independent channels of optical conversion, in a single 3RU frame
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK capability
- Detection and display of input cable length
- Operation with multi-mode or single-mode fiber
- SC/PC, ST/PC or FC/PC connector options
- Tally output on Frame Status bus upon loss of input signal
- VistaLINK capable for remote monitoring via SNMP (using VistaLINK PRO) when installed in 7800FR frame with a 7700FC VistaLINK frame controller
- Spec Sheet available - Yes
- Certifications: FCC
- Active Power: 6 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: EU EMC
7707EO
- 19.4Mb/s or 143-540Mb/s SDI Electrical to Optical Converter
7707EO-3
- 19.4Mb/s or 143-540Mb/s Triple SDI Electrical to Optical Converter
7707EO-DS3
- DS3 Electrical to Optical Converter
Triple HD Electrical to Optical Converter
63 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
![Company logo](https://cdn-images.av-iq.com/company/301276medium.gif)
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707EO-3-HD
Request more information from a dealer near you
close
Request more information from a dealer near you