Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HD-SDI 4 AES Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, Dual Fiber, CWDM Tx
Model: 7707MTAxx-HD-F2
- Supports HD-SDI and SDI video
- Multiplexes up to 4 AES audio, bi-directional RS-232/422, 2 GPI and 2 GPO with HD-SDI or SDI
- Supports all SMPTE ST 292-1 (1.485Gb/s) rates/standards
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports 32, 44.1, 48kHz AES audio inputs
Compare
Project List
Product Info
Tech Specs
Documents
The 7707MTAxx-HD-F2 is a HD-SDI, 4 AES, Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, dual fiber, CWDM Tx, VistaLINK®.Supports HD-SDI and SDI video.Supports single-mode and multi-mode fiber optic cable.
- Supports HD-SDI and SDI video
- Multiplexes up to 4 AES audio, bi-directional RS-232/422, 2 GPI and 2 GPO with HD-SDI or SDI
- Supports all SMPTE ST 292-1 (1.485Gb/s) rates/standards
- Supports 525/625 line component 4:2:2 SDI @ 270Mb/s
- Supports 32, 44.1, 48kHz AES audio inputs
- Reclocked video output for additional signal distribution
- AES audio inputs can be synchronous or asynchronous to each other and/or to input video
- Dolby E compatible
- Embedded audio assignment/shuffle from input AES, input groups/channels and internal audio mixers
- Four stereo pair mixers allow left/right assignment and summing from input AES and input groups/channels
- Adjustable AES delay up to 50ms
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Local display of optical signal strength, video, audio and data presence, video format, GPI and GPO status
- Automatic coaxial input equalization up to 130m at 1.485Gb/s and 250m at 270Mb/s (Belden 1694A)
- Accepts any wavelength in the 1270nm to 1610nm range
- Optical output wavelengths of 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Supports single-mode and multi-mode fiber optic cable
- Fully hot-swappable from front of frame
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Active Power: 9 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with FCC Part 15 Class A, EU EMC Directive
- Serial Digital Video Input Number of Signals: 1
- Serial Digital Video Input Standards: SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi)
- Serial Digital Video Input Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Input Equalization: Automatic to 100m (typ) @ 1.485Gb/s with Belden 1694A or equivalent cable
- Serial Digital Video Input: Automatic to 250m (typ) @ 270Mb/s with Belden 1694A or equivalent cable
- Serial Digital Video Input Return Loss: > 15dB up to 1.5GHz
- Serial Digital Video Output Number of Signals: 1
- Serial Digital Video Output Standards: SMPTE ST 292-1 (HD-SDI), SMPTE ST 259-C (SD-SDI), SMPTE305.2M (SDTi), EN500083-9 (DVB-ASI)
- Serial Digital Video Output Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Output Signal Level: 800mV nominal
- Serial Digital Video Output DC Offset: 0V ±0.5V
- Serial Digital Video Output Rise and Fall Time: 150ps nominal @1.485Gb/s
- Serial Digital Video Output: 600ps nominal @270Mb/s
- Serial Digital Video Output Overshoot: < 10% of amplitude
- Serial Digital Video Output Return Loss: > 15dB up to 1.5GHz
- Serial Digital Video Output High Freq. Jitter: < 0.2 UI
- AES Audio Inputs Number of Signals: 4
- AES Audio Inputs Standards: AES3-2003 (Balanced AES)
- AES Audio Inputs: SMPTE ST 276 (Unbalanced AES)
- AES Audio Inputs Connector: Multi-pin Removable Terminal Block
- AES Audio Inputs Sampling Rate: 32kHz, 44.1kHz, 48kHz
- AES Audio Inputs Resolution: Up to 24 bits
- AES Audio Inputs Minimum Input: < 200mV p-p
- AES Audio Inputs Balanced: > 7V p-p
- AES Audio Inputs Unbalanced: > 1.2V p-p
- Impedance Balanced: 110?
- Impedance Unbalanced: 75?
- Impedance Return Loss: > 15dB, from 1MHz to 6MHz
- Impedance Wideband Jitter: < 10ns p-p, with conditions of minimum to maximum cable length
- Serial Data Number of Signals: 1 input/output
- Serial Data Connector at Breakout: Multi-pin Removable Terminal Block
- Serial Data Signal Type: RS-422, RS-232, or RS-485 (selectable)
- Serial Data Input Termination: High impedance
- Serial Data Input Failsafe Bias: 5k? to 5V on DI+ (selectable)
- Serial Data Baud Rate: Up to 153Kb/s (selectable)
- General Purpose Inputs Number of Signals: 2
- General Purpose Inputs Connector at Breakout: Multi-pin Removable Terminal Block
- General Purpose Inputs Type: Opto-isolated, Active low
- General Purpose Inputs Input Voltage:
- General Purpose Inputs Safe Voltage Range: -20V to +10V
- General Purpose Inputs Off Condition (min): +3.5V
- General Purpose Inputs On Condition (max): +2.5V (active low)
- General Purpose Inputs Input Current (min): 1mA
- General Purpose Inputs Input Current (max): 10mA (internally limited)
- General Purpose Outputs Number of Outputs: 2
- General Purpose Outputs Type: Dry contact relay closure to GPO COMMON, normally open
- General Purpose Outputs Connector: Multi-pin Removable Terminal Block
- General Purpose Outputs Output Current (min): 100mA
- Optical Input/Output Number of Connections: 1 or 2 (-F2 versions)
- Optical Input/Output Connector: Female SC/PC, ST/PC or FC/PC
- Optical Input/Output Return Loss: > 14dB
- Optical Input/Output Rise and Fall Time: 200ps nominal
- Optical Input/Output Wide Band Jitter: < 0.20 UI
- Optical Input/Output Fiber Size: 9µm core/125µm overall
- Optical Input/Output Input Optical Sensitivity: See Application Configurations Chart
- Wavelengths Standard: 1310nm, 1550nm (nominal)
- Wavelengths CWDM: 1270,1290,1310,1330,1350,1370,1430,1450,1470,1490,1510,1530,1550,1570,1590,1610 Nm
- Wavelengths DWDM: C-Band/L-Band (ITU-T G.694.1 compliant) (see ordering information)
- Output Power 1310nm FP: -7dBm ±1dBm
- Output Power CWDM: 0dBm ±1dBm
- Output Power DWDM: +7dBm ±1dBm
- Physical 7707MTA15-HD-W: 1
- Physical -F2 versions: 2
Bi-directional RS-232/422, 2 GPI/GPO Fiber Transmitter
88 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707MTAxx-HD-F2
Request more information from a dealer near you
close
Request more information from a dealer near you