Pro AV Catalog
				
	
	
	
	
	
	
Manufacturers
		
	
	
	
	PRODUCT CATEGORIES
		
	
	
	
	
	
		Matching Keywords
			
		
		
		
	
	Model Numbers
		
	
	
 
				
			 Request Quote
							
								All Products
							
						Optical to Optical Wavelength Shifter/Regenerator, DWDM DFB Laser, Dual Line, High Sensitivity Receiver, VistaLINK®
Model: 7707OODxxx/Dyyy-2L-OC-H
- Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
- Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
- Full-Duplex
- Wide range optical input (1270nm-1610nm)
- DWDM wavelengths (ITU-T G.694.1 compliant) available for fiber link connection
				
					
							
	            
	                Compare
	            
				
	        
		
					Project List
				
			Product Info
	
				
					Tech Specs
				
					Documents
				
			
					The 7707OO-2L-OC are VistaLINK® enabled, optical to optical wavelength shifter/regenerator for telecom and datacom signals. Monitoring and control of card status and parameters is provided locally at the card edge and remotely via VistaLINK®. The 7707OO-2L-OC accepts two fiber inputs and provides two optical outputs. All versions accept 1270nm to 1610nm optical input signals on multi-mode or single-mode fiber. The 7707OO-2L-OC are available in DWDM configurations. 
						
							
					
				
			- Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of other telecom and datacom rates (see specifications)
- Non-reclocking mode for support of additional signal rates (125Mb/s-3.187Gb/s)
- Full-Duplex
- Wide range optical input (1270nm-1610nm)
- DWDM wavelengths (ITU-T G.694.1 compliant) available for fiber link connection
- Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®
- Detection and display of optical input power and data rate
- Fully hot-swappable from front of frame
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with a 7700FC VistaLINK® Frame Controller
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Connector Type - ST-ST
- Spec Sheet available - Yes
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
- Optical Inputs Rates (non-reclocked): 125Mb/s-3.187Gb/s
- Optical Inputs Wavelength: 1270 to 1610 Nm
- Optical Connector: Female SC/PC, ST/PC, FC/PC, SC/APC
- Optical Sensitivity: -29 dBm
- Max. Input Power: -7 dBm
- Optical Input Fiber Size: 62µm core / 125µm overall
- Optical Number of Outputs: 2
- Optical Return Loss: < 14dB
- Optical Output Fiber Size: 9µm core / 125µm overall
- Power: 9 W
- Number of Slots: 1
									 
										
										Optical to Optical Wavelength Shifter/Regenerator 
										
										
											  63 kb
										
											- Data Sheet 
								
								
					Project List
				
			 Request Quote
			
		
				 	Thank you!
				 
				 
				 	Someone will be in touch with you shortly.
				 
			
					Contact McCann Systems
				
			
				 	
				 		close
				 	
				 	
				 
			
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
						
						
						Evertz
						
						Model: 7707OODxxx/Dyyy-2L-OC-H
					
				US B2B Inquiries Only
				
				
				
				
					Request more information from a dealer near you
				
			
					
						close
					
					
				
			
					Request more information from a dealer near you