Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual S-Video Fiber Transmitter, CWDM DFB laser, VistaLINK®
Model: 7707SVTxx-2
- Single card fiber multiplexor for up to two S-Video signals
- Supports both NTSC and PAL
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Superior digital data transmission
Compare
Project List
Product Info
Tech Specs
Documents
The 7707SVTxx-2 is a VistaLINK® capable S-Video fiber transmitter for broadcast quality signals. This single card module accepts two S-Video inputs, performs analog to digital conversion and transmits them over a single fiber. The companion 7707SVR-2 S-Video Fiber Receiver demultiplexes the signals and converts them back to analog form. The fiber output of the 7707SVT-2 is available in an assortment of optical wavelengths accomodating 1310nm/1550nm, CWDM and DWDM transmission schemes. The 7707SVT-2 occupies one card slot and can be housed in the 1RU 7801FR frame which holds up to four single or two dual slot modules, the 3RU 7800FR frame which has a 15 slot capacity, the portable 3RU 350FR frame which has a 7 slot capacity, or a standalone enclosure which holds a single module.
- Single card fiber multiplexor for up to two S-Video signals
- Supports both NTSC and PAL
- Broadcast quality analog video performance
- Meets or exceeds EIA/TIA RS250-C short haul specifications for analog video transport
- Superior digital data transmission
- Signal transport over fiber uninterrupted by loss of input video feeds
- Comprehensive Signal and card status monitoring via four-digit card-edge display, or remotely through SNMP and VistaLINK® capability
- Fully hot-swappable from front of frame with no fiber disconnect/reconnect required
- Supports single mode and multi-mode fiber optic cable
- Optical output wavelengths at 1310nm, 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Signal to Noise Ratio: 70 dB
- Active Power: 0.92 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Class 1 laser product, Complies with 24CFR 1040.10 and 1040.11 IEC 60825-1,Complies with FCC Part 15 Class A, EU EMC Directive
- Analog S-Video Input Standards: NTSC, SMPTE ST 170, PAL, ITU-R 624-4
- Analog S-Video Number of Inputs: 2
- Analog S-Video Input Connector: IEC 933-5 (4-pin mini-DIN)
- Analog S-Video Input Signal Quantization: 12 bits
- Analog S-Video Input System Bandwidth: 5.5 MHz
- Analog S-Video Input Input Level: Y: 1.0V p-p, C: 0.286V p-p
- Analog S-Video Input Input Impedance: 75 ohm
- Analog S-Video Input Return Loss: > 30 dB to 5.5MHz
- Analog S-Video Input Signal/Noise Ratio: > 70 dB
- Analog S-Video Input Differential Gain: < 1.0 %
- Analog S-Video Input Differential Phase: < 0.7 deg
- Analog S-Video Input Passband Ripple NTSC: < ±0.1dB to 4.1MHz, < ±0.2dB to 5.5MHz
- Analog S-Video Input Passband Ripple PAL: < ±0.1dB to 4.8MHz, < ±0.2dB to 5.8MHz
- Analog S-Video Input Line Time Distortion: 1.2 %
- Optical Output: 1
- Optical Output Return Loss: > 14 dB
- Output Power 1310nm FP (Standard): -7 ±1 dBm
- Output Power 1550 & CWDM DFB: 0 ±1 dBm
- Output Power DWDM: 7 ±1 dBm
- System Performance Video Input to Output Delay: < 10 micro s
- Number of Slots: 1
Fiber Transmitter
82 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
![Company logo](https://cdn-images.av-iq.com/company/301276medium.gif)
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707SVTxx-2
Request more information from a dealer near you
close
Request more information from a dealer near you