Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Dual SDI/ASI/SDTi + Ethernet SONET/SDH Fiber Transceiver
Model: 7707VB-2-OC12
- Transports signals at OC-12/STM-4 rate
- Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI and SDTi signals
- Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM technology
- Interfaces directly to the SONET/SDH infrastructure
- Signal transport over fiber uninterrupted by loss of any input feed
Compare
Project List
Product Info
Tech Specs
Documents
The model 7707VB-2-OC12 is a fiber transceiver transports signals at OC-12/STM-4 rate. Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI and SDTi signals. Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM technology. Interfaces directly to the SONET/SDH infrastructure. Signal transport over fiber uninterrupted by loss of any input feed. Transparently passes embedded AES or any other data in horizontal/vertical ancillary data space. Stratum 3 wander/holdover/jitter compliance. Wide input frequency range tolerance (+/-50ppm). Fully hot-swappable from front of frame. Supports single-mode and multi-mode fiber optic cable. Optical output wavelengths of 1550nm, and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant). DWDM wavelengths (ITU-T G.694.1 compliant) also available. SC/PC, ST/PC, FC/PC connector options. Comprehensive signal and card status monitoring via four digit card edge display or remotely through SNMP and VistaLINK®. VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with 7700FC VistaLINK® frame controller. Occupies two card slots and can be housed in 3RU 7800FR frame which has 15 slot capacity/portable 3RU 350FR frame which has 7 slot capacity.
- Transports signals at OC-12/STM-4 rate
- Single card TDM multiplexer for two bi-directional asynchronous SDI, DVB-ASI and SDTi signals
- Built-in Ethernet transceiver with one 10/100/1000 Base-T compatible port with FBM technology
- Interfaces directly to the SONET/SDH infrastructure
- Signal transport over fiber uninterrupted by loss of any input feed
- Transparently passes embedded AES or any other data in horizontal/vertical ancillary data space
- Stratum 3 wander/holdover/jitter compliance
- Wide input frequency range tolerance (+/-50ppm)
- Fully hot-swappable from front of frame
- Supports single-mode and multi-mode fiber optic cable
- Optical output wavelengths of 1550nm and up to sixteen CWDM wavelengths (ITU-T G.694.2 compliant)?
- DWDM wavelengths (ITU-T G.694.1 compliant) also available
- SC/PC, ST/PC, FC/PC connector options
- Comprehensive signal and card status monitoring via 4 digit card edge display or remotely through SNMP and VistaLINK®
- VistaLINK® capable for remote monitoring via SNMP (using VistaLINK® PRO) when installed in 7800FR frame with 7700FC VistaLINK® frame controller
- Occupies 2 card slots and can be housed in 3RU 7800FR frame which has 15 slot capacity/portable 3RU 350FR frame which has 7 slot capacity
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - multi-rate SDI
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Certifications: FCC
- Active Power: 13 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: EU EMC
Fiber Transceiver
49 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707VB-2-OC12
Request more information from a dealer near you
close
Request more information from a dealer near you