Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
8-channel 3G/HD/SDI/DVB-ASI + Ethernet SONET/SDH Fiber Transceiver
Model: 7707VB-8-HS-OC192
- Interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure
- Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction
- Full-rate, uncompressed, asynchronous video channels with wide tolerance (+/-50ppm)
- Flexible bandwidth management (FBM) to control Ethernet bandwidth allocation
- One loopback (output channel eight), user selectable for monitoring of inputs/outputs
Compare
Project List
Product Info
Tech Specs
Documents
The model 7707VB-8-HS-OC192 is a fiber transceiver interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure. Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction. Full-rate, uncompressed, asynchronous video channels with wide tolerance (+/-50ppm). Flexible bandwidth management (FBM) to control Ethernet bandwidth allocation. One loopback (output channel eight), user selectable for monitoring of inputs/outputs. Pluggable XFP fiber module permits wavelength swapping/sparing. SONET/SDH jitter performance with Stratum 3 clocking. Comprehensive signal and card status monitoring via four-digit card-edge display. VistaLINK® enabled for remote monitoring/control, with two possible interface methods, using local Ethernet connection on rear-plate (has local SNMP agent) and using 7700FC VistaLINK® frame controller installed in 7700FR-C frame. Automatic coaxial equalization up to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s (Belden 1694A or equivalent cable). Fully hot-swappable from front (main board) and rear (XFP fiber module) of frame. Optical output wavelengths of 1310nm and 1550nm. Female LC Duplex fiber connector.
- Interfaces directly to SONET (OC-192) or SDH (STM-64) infrastructure
- Flexibility to combine video and Ethernet signals to fill SONET/SDH capacity in each direction
- Full-rate, uncompressed, asynchronous video channels with wide tolerance (+/-50ppm)
- Flexible bandwidth management (FBM) to control Ethernet bandwidth allocation
- One loopback (output channel eight), user selectable for monitoring of inputs/outputs
- Pluggable XFP fiber module permits wavelength swapping/sparing
- SONET/SDH jitter performance with Stratum 3 clocking
- Comprehensive signal and card status monitoring via four-digit card-edge display
- VistaLINK® enabled for remote monitoring/control, with two possible interface methods, using local Ethernet connection on rear-plate (has local SNMP agent) and using 7700FC VistaLINK® frame controller installed in 7700FR-C frame
- Automatic coaxial equalization up to 70m at 2.97Gb/s, 100m at 1.485Gb/s, and 250m at 270Mb/s (Belden 1694A or equivalent cable)
- Female LC Duplex fiber connector
- Fully hot-swappable from front (main board) and rear (XFP fiber module) of frame
- Optical output wavelengths of 1310nm and 1550nm
- Fiber Optic Connector Type - Other
- Fiber Optic Signals Supported - Other
- Spec Sheet available - Yes
- Certifications: FCC, CSA
- Active Power: 25 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: EU EMC
Fiber Transceiver
80 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7707VB-8-HS-OC192
Request more information from a dealer near you
close
Request more information from a dealer near you