Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Gigabit Ethernet Fiber Transceiver, Dual Fiber, DWDM TX, High Sensitivity RX, VistaLINK®
Model: 7708GTDxxx-F2-H
- Auto negotiation for 10/100/1000 speeds, half/full duplex modes
- Link status monitoring indicators
- Optional VistaLINK® enabled for remote monitoring and control
- Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths in the 1270nm to 1610nm range
- DWDM (ITU-T G.694.1) wavelengths available
Compare
Project List
Product Info
Tech Specs
Documents
The 7708GT series Gigabit Ethernet Fiber Transceivers provide an economical method of transmitting 10/100/1000Base-T Ethernet channel over optical fiber. The transceiver is IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX and IEEE 802.3ab 1000BASE-TX compliant, mediates between a 10/100/1000BASE-TX segment. A pair of 7708GT transceivers permits full duplex communication over a single optical fiber or dual fiber. There is a built in two port gigabit Ethernet switch that supports a total bandwidth of 1000Mb/s. Diagnostic LEDs provide indication of power, linkage and data reception. The 7708GT series modules support jumbo frames and spanning tree protocol. Two versions of the 7708GT allow the user to choose the optimal price / performance / features to suit a particular application. The "-F2" version is designed to receive and transmit over two different fibers and has the lowest insertion loss. This version can operate with Multi-mode or Single-mode fiber. The standard version is designed to receive and transmit on two different wavelengths (1310nm and 1550nm) over a single fiber and can operate with Single mode fiber only.
- Auto negotiation for 10/100/1000 speeds, half/full duplex modes
- Link status monitoring indicators
- Optional VistaLINK® enabled for remote monitoring and control
- Optical output available in 1310nm, 1550nm and up to sixteen CWDM wavelengths in the 1270nm to 1610nm range
- DWDM (ITU-T G.694.1) wavelengths available
- Supports multi-mode or single-mode fiber
- Fully hot-swappable from front of frame with no fiber or Ethernet channel disconnect required
- SC/PC, ST/PC or FC/PC connector options
- Jumbo frame support
- Spanning tree protocol support
- Fiber Optic Connector Type - SC-SC
- Fiber Optic Connector Type - ST-ST
- Spec Sheet available - Yes
- Ethernet Standard: IEEE 802.3 (10 BaseT), IEEE 802.3u (100 BaseTX), IEE 802.3ab (1000baseTX)
- Ethernet Number of Ports: 2
- Ethernet connector: RJ45
- Ethernet Cable Requirements: 10 BaseT UTP category 3,4 or 5 cable up to 328ft/100m (2 pairs), 100 BaseTX UTP category 5 cable up to 328ft/100m (2 pairs), 1000 BaseTX UTP category 5 cable up to 164ft/50m (4 pairs)
- Optical Connector: 2 female SC/PC, ST/PC or FC/PC
- Optical Input Wavelengths: 1270 to 1610 Nm
- Maximum Input Power: -8 dBm
- Input Optical Sensitivity: -28 dBm
- Output Wavelengths: DWDM C-Band (ITU-T G.694.1 compliant)
- Output Power: DWDM (DFB) +7dBm ± 1dBm
- Power: 10 W
- Number of Slots: 1
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with 24CFR 1040.10 and 1040.11, IEC 60825-1, FCC Part 15, EU EMC Directive
Gigabit Ethernet Fiber Transceiver
55 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
![Company logo](https://cdn-images.av-iq.com/company/301276medium.gif)
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7708GTDxxx-F2-H
Request more information from a dealer near you
close
Request more information from a dealer near you