Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HD/SD Audio De-embedder & Dolby-E™/AC-3 Decoder & Re-embedder
Model: 7720AD8-DD-HD
- Audio de-embedder and re-embedder for 4 groups of audio
- Dolby® E/AC-3 decoding for selected audio source
- Dolby Metadata is embedded in HD VANC for downstream device decoding
- 8 AES inputs for backup, voice-over or Dolby-E/AC-3 content
- Adjustable video delay to match Dolby decoder audio delay
Compare
Project List
Product Info
Tech Specs
Documents
The 7720AD8-DD-HD Audio De-embedder and Dolby® Decoder & Re-embedder extracts embedded audio from 4 specified groups as defined by SMPTE ST 299-1 from a 1.5Gb/s serial HDTV or as defined by SMPTE ST 272 from a 270Mb/s serial SDTV video signal. One selected channel is processed by the on-card Dolby Decoder. If the channel contains Dolby-E or Dolby Digital (AC-3), it will yield up to 8 additional discrete audio channels, 2 channels of stereo downmix and the associated Dolby-E metadata. Up to 16 selected channels may be optionally delayed up to 1.2 seconds and re-embedded into the output video and/or directed to AES outputs. Video output may be optionally delayed to help with lip sync. If PCM audio is embedded, the device acts as a simple 4 group audio de-embedder. This device also handles the Dolby-E Metadata. Metadata is optionally embedded in VANC and can be provided as an output for downstream devices (i.e. Dolby-Encoders, Multichannel Audio Tool, etc.). Metadata can be monitored using VistaLINK® and dial norm parameters can be modified. For lip sync cohesion and ease of editing, Dolby-E data is organized in blocks with lengths matching the associated video frame. The decoder will match the beginning of each output block with the start of video, as provided with the genlock input. Additional delay can be dialed up by the user, up to 1.2 sec. The 8 AES inputs can be configured as a backup, in the event the primary is lost, or as a voice-over source. VistaLINK® enables control and configuration capabilities via Simple Network Management Protocol (SNMP). This offers the flexibility to manage the module status monitoring and configuration from SNMP enabled control systems such as Evertz VistaLINK® PRO locally or remotely.
- Audio de-embedder and re-embedder for 4 groups of audio
- Dolby® E/AC-3 decoding for selected audio source
- Dolby Metadata is embedded in HD VANC for downstream device decoding
- 8 AES inputs for backup, voice-over or Dolby-E/AC-3 content
- Adjustable video delay to match Dolby decoder audio delay
- Automatic switchover to backup audio source on loss of selected Dolby stream
- Headphone jack for monitoring stereo down-mix or any input source
- Two full audio mixers with 16 output channels
- Card edge display
- VistaLINK® capable for remote monitoring and control via SNMP (using VistaLINK® PRO) when installed in 7800FRframe with a 7700FC VistaLINK® Frame Controller
- Program input supporting both HD (1.5Gb/s) and SD (270Mb/s)
- Reference input supporting NTSCM, PAL-B and tri-level for meta data phasing
- 8 AES inputs for backup/voice-over source
- Metadata input
- 2 processed HD outputs (1 protected with bypass relay)
- 8 AES de-embedded and processed outputs
- 1 DB-9 Dolby metadata (RS-422/485) on same connector as input
- Module Status
- Video Signal presence
- Selected audio group presence
- Dolby decoder processing status
- Genlock health/compatibility
- AES signal presence
- De-embedder/Embedder Type - Other
- Spec Sheet available - Yes
- Active Power: 21 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with FCC Part 15 Class A, EU EMC Directive
- Serial Video Input Standard: SMPTE ST 292-1 (1080i/60, 1080i/59.94, 1080i/50, 1080p/30(sF), 1080p/29.97(sF), 1080p/25(sF), 1080p/24(sF), 1080p/23.98(sF), 720p/50, 720p/60, 720p/59.94, 1035i/60, 1035i/59.94),SMPTE ST 259-C (270Mb/s) 525 or 625 line component
- Serial Video Input Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input Equalization HD: 115m @1.5Gb/s with Belden 1694A
- Serial Video Input Equalization SD: 300m @270MB/s with Belden 1694A
- Processed Serial Video Output Standard: Same as input or user controlled
- Processed Serial Video Output Number of Outputs: 2
- Processed Serial Video Output Connector: BNC per IEC 61169-8 Annex A
- Processed Serial Video Output Signal Level: 800 mV nominal
- Processed Serial Video Output DC Offset: 0V ±0.5 V
- Processed Serial Video Output Rise and Fall Time: Per standard
- Processed Serial Video Output Overshoot: < 10 % of amplitude
- Wide Band Jitter HD: < 0.16UI
- Wide Band Jitter SD: < 0.10UI
- Metadata Input/Output Baud Rate: Dolby-E Metadata SMPTE RDD6
- Metadata Input/Output Connector: Female DB-9
- Metadata Input/Output VANC Embedding: SMPTE ST 2020
- AES Audio Input Standard: SMPTE ST 276
- AES Audio Input Number of Inputs: 8 unbalanced
- AES Audio Input Connector: Female High Density DB-15 (breakout cable to BNC provided)
- AES Audio Input Input Level: 0.1 to 2.5 V p-p (5V p-p tolerant)
- AES Audio Input Input Impedance: 75 ohms
- AES Audio Input Return Loss: > 25 dB 100kHz to 6MHz
- AES Audio Input Equalization: Automatic to 1000m with Belden 1694A (or equivalent) @ 48kHz AES signal
- AES Audio Input Sample Rate: 32kHz to 48kHz
- AES Audio Output Standard: SMPTE ST 276, single ended AES
- AES Audio Output Number of Outputs: 8 unbalanced
- AES Audio Output Connector: Female High Density DB-15 (breakout cable to BNC provided)
- AES Audio Output Sample Rate: 48 kHz
- AES Audio Output Impedance: 75 ohms
- AES Audio Output Resolution: Up to 24-bit
HD/SD-SDI Audio De-embedder
73 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7720AD8-DD-HD
Request more information from a dealer near you
close
Request more information from a dealer near you