Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HD SDI to HD Component Analog or Optional VGA Converter
Model: 7731DAC-HD
- Support for all SMPTE ST 274 and ST 296 video formats
- Full 10-bit Broadcast quality
- 4:4:4 Interpolated Component Output
- Card edge selectable YPrPb/RGB/VGA outputs
- GPI controllable 4:3 alignment markers
Product Info
Tech Specs
Documents
The 7731DAC-HD is a professional quality digital to analog converter for HDTV. The 7731DAC-HD supports all signal standards specified in SMPTE ST 274 and SMPTE ST 296. Card edge control allows the user to select RGB, YPrPb or VGA outputs. User controlled 4:3 alignment markers also allow for convenient framing of the video signal. The 7731DAC-HD is available in two versions to easily interface to standard broadcast monitors or VGA computer monitors.
- Support for all SMPTE ST 274 and ST 296 video formats
- Full 10-bit Broadcast quality
- 4:4:4 Interpolated Component Output
- Card edge selectable YPrPb/RGB/VGA outputs
- GPI controllable 4:3 alignment markers
- Optional rear connector plates for use with VGA computer monitors
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Converter Signal Types - Video
- Converter Type - Digital to Analog Converter
- Spec Sheet available - Yes
- Serial Video Input - Standard: SMPTE ST 292-1
- Serial Video - Number of Inputs: 1
- Serial Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Video Input - Equalization: Automatic 125m @ 1.5Gb/s with Belden 1694A (or equivalent)
- Analog Video Output - Standard: SMPTE ST 274, ST 296
- Analog Video Output - Signal level: 1V p-p (YPrPb/RGB) or 0.7V p-p (VGA)
- Analog Video Output - Sync: 300mV or 4V per nominal
- Analog Video Output - Impedance: 75 ohms
- Analog Video Output - Connector: 4 BNC per IEC 61169-8 Annex A
- Analog Video Output - DC Offset: 0 V ±0.1V
- General Purpose Inputs - Type: Opto-isolated, active low with internal pull-ups to Vext pin. May be internally jumpered to +5V
- General Purpose - Number of Inputs: 4
- General Purpose Inputs - Connector: Male High Density DB-15
- General Purpose Inputs - Signal Level: +5 V nominal
- Number of Slots: 1
- Input Signal Types: Video
- Output (Converted) Signal Type: Video
- Active Power: 9 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: FCC Part 15 Class A, EU EMC Directive
HD SDI to HD Component Analog or Optional VGA Converter
63 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7731DAC-HD
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you