Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
HD Dual Link Video Processor
Model: 7732DVP-HD
- Automatically senses between 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 video formats and the 1/1.001 divisor versions where applicable
- 4:4:4 Dual Link HDSDI to 4:2:2 HDSDI converter
- 4:2:2 HDSDI to 4:4:4 Dual link HDSDI converter
- 4:4:4 Dual Link HDSDI to 4:4:4 HDSDI with LUTs
- Two serial digital 1.5Gb/s HD inputs per ST 292-1
Compare
Project List
Product Info
Tech Specs
Documents
The 7732DVP-HD Dual Link Video Processor module is a multi-purpose module designed to convert between 4:2:2 and 4:4:4 HDTV video signals in a wide variety of applications. The model 7732DVP-HD can be operated in a dual link to single link mode for 4:4:4 high definition applications, or 4:2:2 to 4:4:4 mode to convert traditional high definition content to 4:4:4. The 7732DVP-HD occupies one card slot in the 3RU frame, which will hold up to 15 modules or the 1RU frame which will hold up to three modules.
- Automatically senses between 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 video formats and the 1/1.001 divisor versions where applicable
- 4:4:4 Dual Link HDSDI to 4:2:2 HDSDI converter
- 4:2:2 HDSDI to 4:4:4 Dual link HDSDI converter
- 4:4:4 Dual Link HDSDI to 4:4:4 HDSDI with LUTs
- Two serial digital 1.5Gb/s HD inputs per ST 292-1
- Three serial digital 1.5Gb/s HD outputs per ST 292-1
- Bypass relay protection on inputs for power failures
- Retimed 4:4:4 dual link outputs
- Programmable LUTs for 4:4:4 and 4:2:2 HDSDI to accommodate different colorimetry between monitoring devices
- Factory LUTs handle logarithmic "filmstream" inputs from VIPER and ARRI D20 cameras
- Store / recall user presets of common configurations - up to 10 presets
- 6 GPI control inputs to select operating modes or load user presets
- 2 GPO status outputs indicate operating modes - programmable functions
- Card edge menu using OSD on 4:2:2 output to configure the operating modes
- Card edge LEDs for signal presence, module status
- VistaLINK® capable for remote monitoring, control and configuration capabilities via SNMP; using VistaLINK® PRO, CP-2116E or CP-2232E Control Panels. VistaLINK® is available when modules are used with the 3RU 7800FR frame and a 7700FC VistaLINK® Frame Cont
- Processor Type - Video
- Spec Sheet available - Yes
- Serial Digital Video Input - Standard: SMPTE ST 372 (dual link 1.5Gb/s) or ST 292-1 (1.5Gb/s) - auto-detects standard using SMPTE ST 352 Payload ID SMPTE ST 274, SMPTE ST 296 - 1080i/60, 1080i/50, 1080p/24sF, 720p/60 and 720p/50 and the 1/1.001 divisor versions where applicable SMPTE 428-9, ST 2048-2 - 2048x1080p/24sF
- Serial Digital Video Input - Number of inputs: 1 dual link or 1 single link
- Serial Digital Video Input - Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Input - Equalization: Automatic to 65m @ 1.5Gb/s with Belden 1694 or equivalent cable
- Serial Digital Video Input - Return Loss: >-15 dB up to 1.5GHz
- Serial Digital Video Output - Standard: Same as input
- Serial Digital Video Output - Number of Outputs: 2 dual link outputs (bypass relay protected to inputs) + 1 single link output
- Serial Digital Video Output - Connector: BNC per IEC 61169-8 Annex A
- Serial Digital Video Output - Signal Level: 800 mV nominal
- Serial Digital Video Output - DC Offset: 0±0.5 V
- Serial Digital Video Output - Rise and Fall Time: 200 ps nominal
- Serial Digital Video Output - Overshoot: <10% of amplitude
- Serial Digital Video Output - Return Loss - 4:4:4 Outputs: > -10dB @ 1.5Gb/s
- Serial Digital Video Output - 4:2:2 Output: > -6dB @ 1.5Gb/s
- Serial Digital Video Output - Jitter: <0.2 UI
- Serial Digital Video Output - Payload ID: SMPTE ST 352
- GPIO Control Port - Number of Inputs: 6, programmable functions
- GPIO Control Port - Number of Outputs: 2, programmable functions
- GPIO Control Port - Type: Opto-isolated, active low with internal pull-ups to +5V or +12V (jumper selectable)
- GPIO Control Port - Connector: 9-pin female D
- GPIO Control Port - Signal Level: Closure to ground
- Look Up Tables - Type: 10 bit 1-D LUT
- Look Up Tables - Number: 5 factory programmed; 5 User loadable
- Look Up Tables - User Upload: RS-232, 57600 baud using card edge connector
- Input to Output Processing Delay - Video Delay: 2 lines
- Electrical Power: 10 Watts
- Physical Number of Slots: 1
- Active Power: 12 Watt
- DC Voltage: 12 Volts
- Regulatory Compliance: Complies with FCC regulations for class A devices Complies with EU EMC directive
Video Processor
53 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7732DVP-HD
Request more information from a dealer near you
close
Request more information from a dealer near you