Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
VistaLINK Frame Controller
Model: 7800FC
- Complies with IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-TX Ethernet standards
- 1000MB/s Gigabit Ethernet, 100MB/s Fast Ethernet or 10MB/s Ethernet data transfer, selected by auto negotiation
- Full-duplex or half-duplex operation, selected by auto-negotiation
- RJ-45 connector for network cable connection
- RS-232 serial control port for configuration
Compare
Project List
Product Info
Tech Specs
Documents
The 7800FC VistaLINK® Frame Controller card provides a single point of access to communicate with VistaLINK®-capable modules. The 7800FC VistaLINK® Frame Controller provides a 10BASE-T/100BASE-TX/1000BASE-TX Ethernet port and communication is facilitated using Simple Network Management Protocol (SNMP).
The 7800FC VistaLINK® Frame Controller handles all SNMP communications between the frame (7800FR) and the network manager (NMS), and serves as a gateway to individual cards in the frame. The 7800FC VistaLINK® Frame Controller also provides an RS-232 serial port interface for customer configurations.
- Complies with IEEE 802.3 10BASE-T, 100BASE-TX and 1000BASE-TX Ethernet standards
- 1000MB/s Gigabit Ethernet, 100MB/s Fast Ethernet or 10MB/s Ethernet data transfer, selected by auto negotiation
- Full-duplex or half-duplex operation, selected by auto-negotiation
- RJ-45 connector for network cable connection
- RS-232 serial control port for configuration
- Card edge LEDs indicate module fault, microprocessor state, activity and link status
- Rear panel LEDs indicate Ethernet link, activity and speed
- Supports "ftp" upgrades for frame-wide firmware upgrades (product specific)
- Includes VistaLINK® PRO (VLPRO-C) module software configuration tool
- Provides frame/chassis status information through VistaLINK® including power supply status, frame status, card insertion/removal counters, 7800FC software version number and LED control
- Provides an onboard web interface to directly control supported modules
- Systems Controlled - Other
- Spec Sheet available - Yes
- Certifications: FCC
- Active Power: 8 Watt
- DC Voltage: 12 Volts
VistaLINK Frame Controller
88 kb
- Data Sheet
Project List
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Evertz
Model: 7800FC
Request more information from a dealer near you
close
Request more information from a dealer near you