4K H.264 Media Encoder
Model: EV-ENCS-4K-1
- Supports a wide range of resolutions for input signals from standard definition to 3840x2160 at 30Hz, including 1920x1080 at 60Hz and 1920x1200 at 60Hz
- Equipped with H.264 and AAC codec technology, high video/audio quality using low bandwidth
- 1x Ethernet output, 1x HDMI input, 1x analog audio output, and 1x RS232 output
- Supports static IP, DHCP, and auto IP
- Supports output rate limits for bandwidth limited networks
EvertzAV’s EV-ENCS-4K-1 4K H.264 encoder is a live streaming media encoder that interfaces with HDMI signals to deliver media over IP networks. The EV-ENCS-4K-1 encoder can be used with EvertzAV’s 4K H.264 EV-DECS-4K-1 decoder (or a third-party decoder) to provide complete end-to-end streaming systems. It features one HDMI input and one Ethernet output for simplified integration into AV systems.
The EV-ENCS-4K-1 encoder employs standards-based H.264/MPEG-4 AVC encoding and MPEG-2 transport streams, and outputs IP streams that can easily be decoded and viewed on EvertzAV’s own EV-DECS-4K-1 decoder or various third-party decoders. The EV-ENCS-4K-1 encoder also supports AAC audio encoding technology – technology that allows you to transport high quality audio signals using minimal bandwidth.
The EV-ENCS-4K-1 encoder can send media data via multicast or unicast allowing it to operate in many different network environments. Multicast mode saves bandwidth while unicast mode is suitable for common unmanaged switches. Even in networks protected by strict firewalls, the EV-ENCS-4K-1 encoder can activate RTP over RTSP mode to send media data without the need for a new UDP port.
To achieve pairing, you simply need to configure the IP address of the EV-ENCS-4K-1 encoder. The EV-DECS-4K-1 decoder will negotiate with the EV-ENCS-4K-1 encoder and try to obtain the media stream using the most suitable approach. Additionally, the EV-ENCS-4K-1 encoder provides two methods of control: web UI and Telnet API. The web UI enables control through a common web browser while Telnet API enables the devices to be controlled by a third-party system.
- Supports a wide range of resolutions for input signals from standard definition to 3840x2160 at 30Hz, including 1920x1080 at 60Hz and 1920x1200 at 60Hz
- Equipped with H.264 and AAC codec technology, high video/audio quality using low bandwidth
- 1x Ethernet output, 1x HDMI input, 1x analog audio output, and 1x RS232 output
- Supports static IP, DHCP, and auto IP
- Supports output rate limits for bandwidth limited networks
- Easy-to-use control using web UI or Telnet API
- 12V DC or Power over Ethernet (PoE)
- Decoder or Encoder Signal Type - Audio
- Decoder or Encoder Signal Type - Video
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 113 F
- Operating Temperature (Minimum): 32 F
- Active Power: 7.60 Watt
- Current Draw: 1 Amps
- DC Voltage: 12 Volts
- Depth: 1 in
- Height: 5.10 in
- Width: 8.70 in
- Product Weight: 1.76 lbs
- Input Video Port: 1 x HDMI
- Input Video Type: HDMI 1.4
- Supported Input: HDMI Video: 640x4801, 800x6001, 1024x7681, 1280x7681, 1280x8001, 1280x10241, 1360x7681, 1366x7681, 1440x9001, 1400x10501, 1600x12001, 1680x10501, 1920x12001, 720x4801 (480p), 720x5762 (576p), 1280x7203 (720p30), 1280x7202 (720p50), 1280x7201 (720p60), 1920x10802 (1080p24), 1920x10803 (1080p25), 1920x10803 (1080p30), 1920x10802 (1080p50), 1920x10801 (1080p60), 1920x12001 ,3840x21603
- CHROMA SUBSAMPLING: RGB, YCbCr 4:4:4, YCbCr 4:2:2
- Color Depth: 8 bits
- HDMI Audio: RAW PCM data, 48KHz sps
- Input Video Signal: 0.5~1.2 V p-p
- Input DDC Signal: 5 V p-p (TTL)
- Video Impendence: 100 ohms
- Video Encoding Bit Rate: 2 Mbps to 30 Mbps (configurable)
- Output Video Port: 1 x LAN (POE), 10/100/1000Base-T
- Output Video Type: H.264/MPEG-4 AVC
- Output Video Resolutions: Video: Encoding: H.264/MPEG-4 AVC, Bitrate: 2Mbps-30Mbps, Resolution: 640x4801, 800x6001, 1024x7681, 1280x7681, 1280x8001, 1280x10241, 1360x7681, 1366x7681, 1440x9001, 1400x10501, 1600x12001, 1680x10501, 1920x12001, 720x4801 (480p), 720x5762 (576p), 1280x7203 (720p30), 1280x7202 (720p50), 1280x7201 (720p60), 1920x10802 (1080p24), 1920x10803 (1080p25), 1920x10803 (1080p30), 1920x10802 (1080p50), 1920x10801 (1080p60), 1920x12001 , 3840x21603
- Audio: Encoding: LPCM, AAC, Sampling Rate: 48KHz, Bitrate: 1.6Mbps (LPCM), 240Kbps (AAC), Delivery: Encapsulation Format: MPEG-2 transport stream, Transmission Format: TS over UDP, TS over RTP, Transmission Method: Unicast, multicast, RTP over RTSP, Session control: RTSP (SETUP, TEARDOWN, OPTIONS, PLAY, DESCRIBE)
- Input Audio Port: 1 x HDMI In
- Sampling Rate: 48 kHz
- Output Connectors and Supported Output: 1 x 3.5mm 3-pin phoenix connector (unbalanced stereo audio), 1 x RJ45, Encoding: Stereo LPCM/AAC, Sampling Rate: 48KHz, Bitrate: 1.6Mbps (LPCM), 240Kbps (AAC)
- Output Audio Port: 1 x LAN (PoE), 10/100/1000Base-T
- Control Connectors: 1 x RJ45 (10/100/1000Base-T Ethernet port), 1 x RS232 (to control peripheral equipment)
- Control Method: Web UI, Telnet CLI
- IP Address: DHCP/Static/Auto IP
- Network Switch: Multicast, IGMP v2
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com