Standalone 10GE AV Quad Display Processor/Receiver (4 HDMI Inputs or 4 Transport Inputs, 2 HDMI Outputs, Audio, Ethernet and HID USB)
Model: UXP-RS4K-4
- Supports four HDMI 2.0a inputs or four network transport inputs and two configurable HDMI 2.0a quad output
- Resolution up to 4096x2160p @ 60 Hz, 4:4:4 color sampling
- Select from up to four input videos and independently arrange and output on two separate 4K60 videos (with optional alpha blending)
- 16 predefined layout presets as well as manual layout mode
- Ultra low latency transport over 10GE links
The UXP-RS4K-4 standalone 10GE AV quad image processor/receiver encompasses four HDMI inputs and two HDMI outputs, in addition to its audio, USB HID, and (with the UXP-RS4K-4U version) USB 2.0 ports and a USB Host port. The UXP-RS4K-4 is a standalone device which is compact and quiet and can be installed in various in-room locations, including behind monitors, under/inside desks and lecterns, and floor boxes.
The UXP-RS4K-4’s quad display functionality allows you to select up to four video sources, individually scale and arrange the layout of the video sources, and then output to a 4K60 raster (with optional alpha blending on the video source windows if desired). This quad display functionality is applicable to each HDMI output independently. Video sources can be chosen using either four network transport sources or via the four local HDMI 2.0a 4K inputs (up to 4096x2160p at 60 Hz, 4:4:4 color sampling). 16 predefined preset display layouts
The UXP-RS4K-4 is a managed element of the NUCLEUS platform which is controlled by the NUCLEUS Session Manager — a full featured centralized management server used for the configuration, control, and orchestration of the UXP AV gateways. Any combination of UXP AV gateways can be interconnected using a COTS (Commercial Off The Shelf) network switch and then configured and managed by the NUCLEUS Session Manager.
The NUCLEUS platform operates on a simplified configuration framework allowing administrators the ability to set up a fully functional AV distribution network in no time at all without the hassles associated with most AV distribution platforms available on the market today. The process has been streamlined so that a UXP AV gateway can be taken out of the box and be put to use in less than five minutes. Whether big or small, deployments of all sizes are handled the same way, using the same consistent process.
- Supports four HDMI 2.0a inputs or four network transport inputs and two configurable HDMI 2.0a quad output
- Resolution up to 4096x2160p @ 60 Hz, 4:4:4 color sampling
- Select from up to four input videos and independently arrange and output on two separate 4K60 videos (with optional alpha blending)
- 16 predefined layout presets as well as manual layout mode
- Ultra low latency transport over 10GE links
- Third-party control support
- 5 USB 2.0 ports available on UXP-RS4K-4U
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 104 F
- Operating Temperature (Minimum): 32 F
- Input Impedance: 600 ohm
- Number of Inputs: 8
- Number of Outputs: 2
- AC Voltage (Maximum): 220 Volts
- AC Voltage (Minimum): 110 Volts
- Active Power: 80 Watt
- Current Draw: 11.50 Amps
- DC Voltage: 12 Volts
- Depth: 6.56 in
- Height: 1.81 in
- Width: 8.25 in
- Product Weight: 2.64 lbs
- Video Inputs: 4 HDMI 2.0a
- Video Outputs: 2 HDMI 2.0a
- Supported Resolutions: Up to 4096x2160p at 60 Hz (4:4:4 color sampling)
- Audio Inputs: 1 stereo balanced analog (terminal header)
- Audio Input Impedance: High impedance
- Audio Input Level: Line level (+4dBu)
- Audio Outputs: 1 stereo balanced analog (terminal header) 2 S/PDIF
- Audio Output Level: Line level (+4dBu)
- USB: 2 HID device ports (type A), 1 HID host port (micro type B)
- Ethernet Transport: 10/100/1000 BASE-T RJ45 Ethernet Port (IEEE 802.3)
- Ethernet connector: RJ45
- Transport Ports: 4 SFP+
- 10G Redundancy: Yes
- Output Scaling: Yes
- Output Alpha Blending Support: Yes
- HDMI Audio: LPCM (up to 8 channels), Passthrough support for Dolby Digital®/AC-3, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS-ES, DTSHD High Res, DTS-HD Master Audio, DTS:X
- SNMP Support: Yes
- In-Band Control: Yes
- Control System: NUCLEUS Session Manager
- Third-Party Control Support: Yes
- Web-Based Configuration: Yes
- Security Compliance: Compliant with applicable DoD Network Devices Security Technical Implementation Guide (STIG)
McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com