Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers

Request Quote
All Products
Arrayable Loudspeaker
Series: JM Series
Model: JM-1P
- Applies modern technology to overcome historical point source array limitations
- Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
- Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
Compare
Project List
Product Info
Tech Specs
Documents
No one can do every job with only a single tool, no matter how useful it is.In sound reinforcement, the vertical line array has found great popularity in recent years for a number of good reasons.But Meyer Sound looks further, so we built a line of great self-powered curvilinear array loudspeakers, and then turned our attention towards the other major tool in the live sound toolbox: horizontal arrays.The introduction of the JM series redefines point source systems and sets the new standard in the 21st century.The JM-1P arrayable loudspeaker combines Meyer Sound's famed clarity of sound and robust, self-powered performance with our latest breakthroughs in horn design, rigging and loudspeaker control to produce an extremely easy-to-use, highly versatile arrayable loudspeaker system powerful enough to act as a main system, but flexible enough to serve in any number of supporting roles whether horizontal or vertical, flown or stacked.With the level of performance and flexibility, the JM-1P is a wise investment that has a place in every job and on every tour.Meyer Sound defined the point source array with the classic UPA-1 in 1980, and the self-powered UPA-1P remains one of our top sellers today.With the tremendous technology advances of the last 12 years built into the JM-1P, we are redefining point source systems.The optional RMS remote monitoring system provides comprehensive monitoring of system parameters on a Windows-based computer.
- Applies modern technology to overcome historical point source array limitations
- Tight-packing results in cleaner sightlines and neater appearance, and eliminates angle setting
- Each JM-1P cabinet utilizes an REM and horn for precise 20° horizontal coverage in tight-packed arrays
- Exceptional size-to-power ratio; easily powerful enough to use for main system, delay stacks, or fill duties
- QuickFly rigging offers flexibility of both horizontal and vertical arrays, with option to fly or groundstack
- Consistent and predictable array performance ensures accurate system design
- Applications
- Theatres and theatrical sound reinforcement
- Houses of worship
- Portable and installed AV systems
- Center and sidefill in large-scale systems
- Concert Halls
- Distributed systems in stadiums and theme parks
- Nightclubs
- Loudspeaker Setup - Rigged
- Spec Sheet available - Yes
- Maximum Frequency Response (Bandwidth): 18 kHz
- Maximum Frequency Response (Bandwidth): 18000 Hz
- Minimum Frequency Response (Bandwidth): 53 Hz
- Minimum Frequency Response (Bandwidth): 0.05 kHz
- Coverage Horizontal: 20 degrees
- Coverage Vertical: 60 degrees
- Maximum SPL (Sound Pressure Level): 138 dB
- Power Handling (High Frequency): 250 Watt
- Power Handling (Low Frequency): 1200 Watt
- AC Voltage: 264 Volts
- Active Power: 1275 Watt
- Current Draw: 21.60 Amps
- Peak Power: 2250 Watt
- Depth: 29.03 in
- Height: 36.08 in
- Width: 16.79 in
- Product Weight: 147 lbs
- Color: Black
- Construction: Multi-ply hardwood, Hex-stamped steel with black mesh screen
- Impedance: 10000 ohm
- Impedance (High Frequency): 8 ohm
- Impedance (Low Frequency): 4 ohm
- Frequency Response2: 56 Hz – 16.5 kHz ±4 dB
- Phase Response: 580 Hz – 16 kHz ±45°
- Dynamic Range: >110 dB
- Low Frequency: High-power 15" cone driver with neodymium magnet Nominal impedance: 2 ? Voice coil size: 4"
- High Frequency: 4" compression driver Voice coil size: 4" Diaphragm size: 4", Exit size: 1.5"
- Type: Differential, electronically balanced
- Maximum Common Mode Range: ±15 V DC, clamped to earth for voltage transient protection
- Connectors: Female XLR input with male XLR loop output or VEAM all-in-one connector (integrates AC, audio, and network)
- Wiring: Pin 1: Chassis/earth through 220 k?, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Case: Earth ground and chassis
- DC Blocking: Differential DC blocking up to the maximum common mode voltage
- CMRR: >50 dB, typically 80 dB (50 Hz – 500 Hz)
- RF Filter: Common mode: 425 kHz; Differential mode: 142 kHz
- TIM Filter: Integral to signal processing (<80 kHz)
- Nominal Input Sensitivity: 0 dBV (1.0 V rms, 1.4 V peak) continuous is typically the onset of limiting for noise and music
- Input Level: Audio source must be capable of producing +20 dBV (10 V rms, 14 V peak) into 600 ? in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker
- Output Power6: 1275 W (1 x 1000 W, 1 x 275 W)
- THD, IM, TIM: <.02%
Meyer Sound JM-1P Data Sheet.pdf
700 kb
- Data Sheet
Project List
Meyer Sound JM-1P Operating Instructions.pdf
7202 kb
- Instructions
Project List
JM-1P_2D.zip
369 kb
- BIM Objects
Project List
JM-1P_Detail.zip
5117 kb
- BIM Objects
Project List
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact McCann Systems
close

McCann Systems
290 Fernwood Avenue
Edison, NJ 08837
USA
1-888-414-3806
www.mccannsystems.com
Contact in regards to this product:
Meyer Sound Laboratories, Inc.
Model: JM-1P
US B2B Inquiries Only
Request more information from a dealer near you
close
Request more information from a dealer near you